bigcoupe.com

Sold in 12 hours.................Thanks Guys..............I will be back again!

Hey Marc, They are Corbeau A4 Racing Seats, front reclining. We used the standard 635 seat mounts and added some aluminum mounting rails to adapt the A4 seats. Riding position is same as stock, even in the overall seat height. They fit perfectly and are very comfortable even on a long haul. These ar...

Finally got the car cleaned and ready to be enjoyed by the next owner. As I couldn't even get the picture on the original post to come in correctly, I have all the photos in the Dropbox link below. ( Wasn't even going to try again!) https://vw16-my.sharepoint.com/:f:/g/personal/tmarino_victorywoodwo...

Hey Eric,
I just cleaned up my ‘87 635csi this weekend as I need to move it soon. I just uploaded the photos and videos here…

https://www.dropbox.com/sh/3w4tgawi2c5i ... quTUa?dl=0

Take a look at it. A few small projects but runs every day.

Thanks,
Tom

Hey Guys, Time to part with my Cinnabar Red '87 635, 5 speed, as I may need to relocate for another job opportunity and can't keep hauling it around with me. I have some detailed undercarriage photos in a drop box link as posted below and an exterior photo here. I will be gathering the interior phot...

Not sure how the photo got upside down!
Sorry guys

Well guys, I've held on to my old girl for many years but it's time to find a new home for her. The car is an original TX car I bought from a BMWCCA member years ago. It's always been gargaged so the dash and the exterior rubber is in good shape. It was originally an auotmatic car and the PO convert...

Hey Guys,
I’m in the hunt for a set of Euro Bumpers for my 87 635. I’m located in Reno, NV but am available to pickup on the West Coast or ship from elsewhere.
Any help is greatly appreciated.
Thanks

Tom in Reno

Good old Bav Auto has reman front calipers for less than $60 each with a 1-2 day lead time. It's not even worth breaking the old ones apart for that cost. I've used these previously on my 635 and the product is very good. Clean 'em, paint 'em and away you go!

Good Luck,

Has anyone installed the IRP Short Shift Kit from Turner Motorsport on their 635?
Looks like a very interesting shifter upgrade as I'm really ready to upgrade my sloppy shifter and linkage once and for all this winter.
Any advice will be much appreciated.

Thanks guys

Tom in NV

Well, I believe I’ve read every article about bleeding the notorious clutch slave cylinder and I can’t seem to get it done correctly. I pumped the cylinder on the bench to suck in fluid from the bleed until it started to come out of the inlet port. I then installed the unit, put the pressure bleeder...

That’s about what I figured. I guess I’ll just forget that I ever looked at it
Thanks

As I was working this weekend changing the clutch slave cylinder on my ‘87 635csi, I came across something really strange. The PO of the car had changed it from auto to 5 speed before I had purchased the car approximately 20 years ago. I have never had to change anything in the pedal area up until n...

Currently running my '87 635csi with some rough shift linkage issues. The PO converted the car from auto and installed a Metric Mechanic transmission and clutch assy. Sine the linkage has been jamming up on me and I can see a lot of slop when I'm under the car I have some serious upgrade questions. ...

Does anyone have a good source in the Sacramento CA area for installation of a new headliner on my '87 635csi? One of those projects I'm not wanting to tackle. I would rather have an expert tackle this. I plan on replacing the front windshield and all the window gaskets at the same time. I'm located...

Looking for the left front end black bumper cover bellows section for my '87 635csi. Needs to be in excellent condition. Would consider the RH and LH pair if in exceptional condition.
Tom in Reno

Looking for recommendations for shipping both of my cars to Reno NV from Suwanee GA, just N of Atlanta.
Shipping my 1987 635csi and my 2007 328.
Anyone have any good shippers or experiences?
Thanks guys,

Tom in GA

Thanks Steve,

I'll look you up when I arrive in a few months. Coming out to look for housing on 1/3 thru 1/8.
Shoot me you text number or email address at some point.
Still debating on either driving the car out or having it shipped out.
Any members have a recommendation?
Thanks
Tom

Hey fellow 6 owners,
Are there any 6 owners out there in the Reno/Sparks Nevada area?
May be transferred to that area and would like to hook up with any 6 enthusiasts.
Thanks guys,

Tom in GA

I'll take the two fog lights. Please PM me the cost of the lights and shipping to the US, post code 30024.
Look forward to hearing from you.
Thanks
Tom Marino
Suwanee, GA 30024
USA

I'll take these if not already sold. Local to Atlanta area in Suwanee.
Any other parts available?
Thanks

Tom in GA
757-681-5615

I'm interested in a set of lower rubber seals. How do I proceed?
Located in the US.
Thanks

Tom in GA

Along with my 87 635csi, I currently run an '07 328i with one of the last normally aspirated engines. This engine is a bear with approx 240HP and good fuel economy. I currently have 150K and the engine has been fault free. It has a lot of power and I would assume this engine can be tweaked to gain e...

Looking for a good cluster for my '87 635. Mileage is not an issue, overall condition is the most important. Needs to have clean interior face and scratch free lens, inside and out.
Thanks guys.

Tom in GA

Thanks for the reply Dean.
I'll get the new hoses and go from there.

Tom in GA