Search found 69 matches
- Sat Mar 03, 2018 2:12 am
- Forum: Engine - Mechanical - Electrical
- Topic: No start M635csi
- Replies: 6
- Views: 4131
Re: No start M635csi
UPDATE It started!. the reason for the no start condition was simple but not obvious. My ecu has the miller performance war chip. I took the ecu out to make a small global adjustment to the timing curve at my tuner. The tuner, after making the change by mistake, had changed the rev limiter to 0 rpm...
- Sat Feb 24, 2018 10:06 pm
- Forum: Engine - Mechanical - Electrical
- Topic: No start M635csi
- Replies: 6
- Views: 4131
Re: No start M635csi
The original relays (which had been working fine for 3 years) that I used on both the main and fuel were plugged in and behaved the same as the new ones and the used and new main both got hot. part numbers are as per the parts catalog.
Jpr
Jpr
- Sat Feb 24, 2018 9:14 pm
- Forum: Cars and Parts wanted
- Topic: WTB euro front spoiler fog lights
- Replies: 2
- Views: 43316
- Sat Feb 24, 2018 6:11 pm
- Forum: Engine - Mechanical - Electrical
- Topic: No start M635csi
- Replies: 6
- Views: 4131
No start M635csi
Help. was running fine but now it cranks but no start. No changes have been made. changed, CTS, FP relay, Main Relay, cleaned AFM. Only clue is main relay was worm/hot even on the unswitched position. even with no key in the ignition, if you present the main relay to the socket, it goes click. batte...
- Sun Feb 18, 2018 12:51 am
- Forum: Cars and Parts wanted
- Topic: WTB euro front spoiler fog lights
- Replies: 2
- Views: 43316
WTB euro front spoiler fog lights
looking for both left and right fog lights on m635.
thanks
Jpr
thanks
Jpr
- Mon Feb 12, 2018 6:50 pm
- Forum: Engine - Mechanical - Electrical
- Topic: Help with high idle
- Replies: 18
- Views: 11233
Re: Help with high idle
I have a Miller MAF kit so I dont have the AFM arrangement anymore. The main bypass screw (the one you adjust 8 turns from fully closed) is the one that, at the moment, makes no change on the idle (no matter the position). I have disconnected the hose from the intake plenum and the idle control slid...
- Mon Feb 05, 2018 10:10 pm
- Forum: Engine - Mechanical - Electrical
- Topic: Bosch 055 ECU pin out
- Replies: 1
- Views: 1764
Bosch 055 ECU pin out
Hi, Anybody familiar with the pin-out of the Bosch 055 (euro M635csi) pin-out? looking to make a loom to shoot for a stand-alone ECU.
Thanks
Jpr
Thanks
Jpr
- Tue Jan 30, 2018 11:33 pm
- Forum: Engine - Mechanical - Electrical
- Topic: Help with high idle
- Replies: 18
- Views: 11233
Re: Help with high idle
Replaced the CTS and no effect.....What to try next?
- Tue Jan 30, 2018 6:49 pm
- Forum: Engine - Mechanical - Electrical
- Topic: Help with high idle
- Replies: 18
- Views: 11233
Re: Help with high idle
No, not yet. Stock timing. could coolant temp sensor affect the idle speed?
- Mon Jan 29, 2018 9:01 pm
- Forum: Engine - Mechanical - Electrical
- Topic: Help with high idle
- Replies: 18
- Views: 11233
Re: Help with high idle
Took the car for smoke testing. They found no leaks. However, I can still place a plastic bag over the airbox opening (I have removed the snorkel) and the engine still runs!!. Not smoothly as without it but the idle does not go down. Again, Throttle plates are all closed (the stop screws are all wit...
- Sun Jan 21, 2018 11:33 pm
- Forum: Engine - Mechanical - Electrical
- Topic: throttle push rod removal for adjustment
- Replies: 3
- Views: 2852
Re: throttle push rod removal for adjustment
Yes, that would take care of the upper one, but how about the lower one?
- Sun Jan 21, 2018 11:32 pm
- Forum: Engine - Mechanical - Electrical
- Topic: Help with high idle
- Replies: 18
- Views: 11233
Re: Help with high idle
Agreed, the question is however, give all that has been done, where can that large of a vacuum leak be?
- Sun Jan 21, 2018 5:54 pm
- Forum: Engine - Mechanical - Electrical
- Topic: Help with high idle
- Replies: 18
- Views: 11233
Help with high idle
Have high idle condition in a M88, Here is what I've done so far: Engine is newly rebuilt New o rings in metering needles New o rings in bypass screw Fully flowed injectors with new o rings Adjusted bypass, throttle blades, bypass screw per manual Slide valve works well. fully closed at working temp...
- Sat Jan 20, 2018 11:18 pm
- Forum: Engine - Mechanical - Electrical
- Topic: throttle push rod removal for adjustment
- Replies: 3
- Views: 2852
throttle push rod removal for adjustment
The throttle linkage in the M635csi has two push rods looking at each other towards the rear of the engine (the front has only one with the springs) these two are so close together that I cant remove the nuts holding each let alone remove the push rod itself. any idea how it is done?
TIA
Jpr
TIA
Jpr
- Thu Jan 11, 2018 7:00 pm
- Forum: Cars and Parts wanted
- Topic: WTB Manual front driver side seat base
- Replies: 5
- Views: 39784
Re: WTB Manual front driver side seat base
Still looking......
Jpr
Jpr
- Thu Jan 04, 2018 6:45 pm
- Forum: Cars and Parts wanted
- Topic: WTB Manual front driver side seat base
- Replies: 5
- Views: 39784
Re: WTB Manual front driver side seat base
Thanks Ray. Im in 3553 NW 79 Ave. Miami, 33122. You can send the pictures to [email protected]
Thanks
Jose Puig
Thanks
Jose Puig
- Wed Jan 03, 2018 6:05 pm
- Forum: Cars and Parts wanted
- Topic: WTB Manual front driver side seat base
- Replies: 5
- Views: 39784
WTB Manual front driver side seat base
Im looking to buy a driver side front manual seat base.
Thanks
Jpr
Thanks
Jpr
- Mon Dec 18, 2017 12:43 pm
- Forum: Engine - Mechanical - Electrical
- Topic: m635 Exhaust options and Supersprint install
- Replies: 69
- Views: 39179
Re: m635 Exhaust options
I would surely recommend the coating. Look for a local source for the process, it is not proprietary and many powder coaters do it. The reduction in under-hood temps will keep all the other components younger.
Jpr
Jpr
- Sat Dec 02, 2017 11:15 am
- Forum: Suspension - Steering - Brakes
- Topic: Coilover Brands
- Replies: 19
- Views: 11622
Re: Coilover Brands
Don't be discouraged in your search for coilovers. Ground Control can help you our and GAZ seems to make a very finished product. The smaller diameter spring will give you the best clearance for your tires and wheels and the adjustability will allow you to tailor the handling characteristics. Every ...
- Thu Aug 31, 2017 1:29 am
- Forum: Cars and Parts wanted
- Topic: WTB m88 fuel rail with injectors
- Replies: 2
- Views: 23712
WTB m88 fuel rail with injectors
sent my engine to a reputable builder with the fuel rail and the injectors and they lost it while working on the head. Need one to finish the build.Please let me know if you have one available.
Thanks
Jpr
Thanks
Jpr
- Mon May 15, 2017 2:35 pm
- Forum: Suspension - Steering - Brakes
- Topic: Which Coilovers?
- Replies: 6
- Views: 6601
Re: Which Coilovers?
So, nobody has done this?
Jpr
Jpr
- Tue May 02, 2017 5:45 pm
- Forum: Suspension - Steering - Brakes
- Topic: Which Coilovers?
- Replies: 6
- Views: 6601
Re: Which Coilovers?
I have used shocks like the Bilstein sports and others thru the years and the quality of the damping performance is not as good as good coilover setup. having replaced the Koni shocks in a 944 turbo with the 28 series coilover brought about much better body control and less harshness. The Bilstein i...
- Thu Apr 27, 2017 7:01 pm
- Forum: Suspension - Steering - Brakes
- Topic: Which Coilovers?
- Replies: 6
- Views: 6601
Which Coilovers?
replacing the shocks in my car and not want to use the usual Bilstein sport solution. Want to have the option of controlling the shock settings and corner weights with coilovers but not want to lower the car much (maybe 1/2"). Has anyone used the GAZ brand? I have heard horror stories of BC and...
- Tue Oct 18, 2016 7:51 pm
- Forum: Suspension - Steering - Brakes
- Topic: Steering box mount reenforcement dowel
- Replies: 2
- Views: 3320
Steering box mount reenforcement dowel
Hi,
Trying to find a source of the mounting dowel to re-enforce the steering box mounting on the M635. My contact is no longer replying to my request. is there anyone who is still supplying this?
Thanks
Jpr
Trying to find a source of the mounting dowel to re-enforce the steering box mounting on the M635. My contact is no longer replying to my request. is there anyone who is still supplying this?
Thanks
Jpr
- Sun Dec 27, 2015 6:18 pm
- Forum: Exterior
- Topic: exterior window surround color
- Replies: 3
- Views: 3128
Re: exterior window surround color
thanks Ron, the Nogaro silver is the color on the window side of the of the chrome strip on the molding right?
Thanks
Jpr
Thanks
Jpr