bigcoupe.com

Hey i had made some coils from a set of b8's. and im littterally about to order theGC kit this weekend, ill let you know how it goes!
Any luck finding/do you know anyone who can get the old JPS flares?

just replaced my early sharks massive dual diaphragm with the small e28/e30 unit, bolted right up.

sign me up!

Those injectors are gonna be close to max DC wouldn't recommend them at all, your reffering to Ford/Bosch orange 4 hole high Z's right?

Op: I have the same manifold, got it about two years ago, flanges were dead flat but on of the bolt holes on the t4 flange was off center and I had to chase all of the threads. Definately go straight to atleast ms2 if you on m1.0 I have the Pinout and how to make a breakout box for the 35 pin. If i ...

use phosphate free coolant, like the new stuff, fl22 etc...

PIC of Harness+MS2:

Hey Guys! Made some head-way over the weekend getting the harness sorted out, thanks for providing the pins. I was able to switch most of them but ive been left with 1 unused pin on my e12/c101, and 2 stray leads on my e28/c101 wiring leads. So: -On the e12 based c101 plug ive been left with 1 pin w...

Also I would really like to flip the throttle body to the other side, but I've run into a small snag. The e12/e24 dual diaphragm boost puts the master-cylinder reservoir to far forward, does anyone know of a remote reservoir i can use with the dual circuit master-cylinder from the e12/e24. I know wi...

Hey Guys! Thanks for the input! Sorry i was a bit ancy from trying to locate a e12 based harness :oops: . -The car has an AL radiator and 16in SPAL pusher wired separately so i should be good there? -I have a couple melted contacts on my e12/e24 panel, could i just grab an early e28 box and toss it ...

Anyone?

Engine Harness available?

Looking for an early m1.0 engine harness, and possibly the fuse box as well. Im looking for something that isn't completely brittle, corroded, or falling apart (long shot i know...) -Also if anyone offers re-conditioning/rebuilding of engine harness's please let me know I am very interested, Thanks!!

viewtopic.php?f=8&t=24438

Original AD when i found the car.

just wanted to give an update on this car.... Wiring was completely shot (still looking for an early harness!!!!!) Engine had zero compression on all 6.... Fuel tank was litterally full of mud 265/od was good It has turbo now made some coilovers for it with bilstein B8 inserts Brakes rebuilt @ GOLDL...

just wanted to give an update on this car.... Wiring was completely shot (still looking for an early harness!!!!!) Engine had zero compression on all 6.... Fuel tank was litterally full of mud 265/od was good It has turbo now made some coilovers for it with bilstein B8 inserts Brakes rebuilt @ GOLDL...

Hey guys! A couple people might Remember a red e12 based shark being posted in the PNW for the staggering price of $750! ...well i got what i paid for :/ The FI/engine harness is totally shot. I sourced a harness from an e28 533i thats in much better shape. A couple issues i have run into so far is ...

How thrashed is thrashed? I might be interested in the air dam.

Is the 81 equipped with LSD? how's the sunroof aswell?

I'm running camber plates from some guy in poland, and honda coil over sleeves on bilstein b8's... call me a heathen ahahah. All I did was add Torrington bearings on the lower perch and under the front spring plate. Then I used upper spring plates from t3tuning.com that have a Torrington bearing asw...

I'll definantly think about it. I know there hard to come by. I was thinking about doing the e28 rear subframe swap but don't wanna lose my e12 basedd calipers :/ do you know if I can still use the e12 based calipers with an e28 rear subframe?

Need an lsd :/ know any were better than ebay to look? The local pic and pull doesn't have anything

Off a 95 non vanos, so it's got double valve springs. Fully rebuilt with new guides, seals, and a really nice 3 angle on the valves. Trying to clear out all of my 24v stuff. Asking 450 OBO. Pm or text me offers. 206-375-0574 I'll ship most anything for free and have a lot more e46/e46 stuff. Aswell ...

Willing to sell just the b6's?

Bump