bigcoupe.com

I restored mine without paint.
Just progressively finer sandpaper then a meguires paint polish compound.

PM sent
As long as it clips onto sensor I am good with it.
Be good to get rid of that pesky coolant light.
Thanks

Thanks but not really.
My lock goes over the top to back side of level sensor. That one has side press.
Can’t see it in my pics because it’s no longer there just crumbled when pulled it off.

Thanks for website,
I’ll look into it but seems like a big trial n error process.
Easier if someone has a parts car with one intact.
We shall see.

Here you go
Thx

My clip has just crumbled and does not lock any more causing it to come loose and low coolant lite.
Tried several mcGyver tricks but not found permanent fix.
If anyone has one that locks onto sensor with few inches of wire attached for soldering let me know.
Thx
88M6

Not one but TWO e24 B7’s up for auction in Fl Via Kuwait looks like! Ooohhhh my https://rmsothebys.com/en/home/lots/mi22#?SortBy=Default&SearchTerm=Alpina&Category=All%20Categories&IncludeWithdrawnLots&Auction=MI22&OfferStatus=All%20Availability&AuctionYear=&Model=Model&a...

Looking at my build sheet on my 84 Euro it came across pond with headlight wiper setup.
Maybe time to start searching.
If you have a set or know of one or see one someplace drop me a PM/ note etc
THX
PacificSharkFest at gmail

Hi Bob
Was just on BAT, not even close to his ask.

https://bringatrailer.com/listing/1988-bmw-m6-110/

Been separated by 120 miles for last 3 yrs.
Not any longer!
Wish I had another 5’ width all three would be together again!

What’s possibility of rust free driver fender well and sunroof ?
Looking at a car for someone that has rust in those areas.
I’m in Ca

It really is one heck of a job.
Glass definitely out front n back as well as sunroof
My guy was overwhelmed . And I jumped in to help.
Used early MB foam backed material almost identical he had in stock.
Have pics on computer .
On the B7

There is a Alpinweis/ black 5 speed 633 about to come out on BAT with under 10k miles
Original as they come
Dad passed who I met competed against at a concours a few years back.
Son is selling , also a BMW enthusiast.

I have both on my M6 round one on drivers side, and pass side has hex shape one so they both fit. Replaced passenger side as it was cracked now looking to do driver. Do have vibration at idle n power throttle which I have not experienced in any of prior e24’s I’ve owned. Tranny mounts were replaced ...

10B0B6AF-5210-4CC8-B329-EF3DAEA50571.jpeg If you ever head down 101 then cross over on 46 to the 5 on way to So Cal take a pit stop to the Wings & Warbirds museum just outside Paso Robles off just highway 46. We went with PSF few years ago. Well worth the trip but leave your self an hour or two...

Just a reminder PSF 2021 #19 is on and we are finalizing dinner plans by the waters of Monterey Bay with terrific views of fisherman's warf and marina.
Window for host hotel is starting to close so if you have not booked u could be in trouble. This time of year is premium .
Www. Pacificsharkfest.com

bump for these?
anyone?
make an offer

Legend?
Nah, just been there done that.
Glad u found it useful n are on to next portion of project.

You might try here, one if our newest members Colin, posted on his FB page his first x with other sharks

https://m.facebook.com/story.php?story_ ... f_textonly

Hopefully FB link works

POSTPONED UNTIL our fall back date of Oct 1-3 Monterey County is in Red COVID tier which means 50% capacity with restrictions for resturaunts . That Is not going to work. Also no bars open unless your seated for food. That's definitely doesn't work. Vaccines are all over the place some finished many...

86_6series wrote: ↑Sun Feb 21, 2021 1:29 pm I have the sport seats, this is the diagram of the motor recliner
notice no lever shown.

https://www.realoem.com/bmw/enUS/showpa ... Id=52_1662

#7
If you look at the round void in diagram you can see the gear teeth

Your problem ,if like mine , which it sounds like is, is not in any of the motors but in the mechanical hinge ,like link below which they all have of one sort or another whether electric or manual. The teeth are not visible in any of these pics but they are there between the arm n base. I ended up p...

Depending on problem not that easy a fix. Mine did same. Reclining arm gear teeth break after shock goes out then seat back just slams into position eventually fatiguing teeth which break,hopefully not while driving. Mine did, [-o< What a surprise. Doable but not that simple. Some have a spring whic...

https://bringatrailer.com/listing/1980- ... rbo-coupe/

I get his giggle during driving video when turbo kicks in