bigcoupe.com

Where did you buy the digital guages? Those look great. You can contact Roland directly, in one of the previous posts I put a link to the thread where he gave permission to publish his email. He will respect GB prices depending of how many units you'll order. I put an order for 2 and he gave us dis...

Yes, this should work.
Looks like a good place, the rest is the same, drill, tap, install boss, screw in temp sensor.

Temp sender as a drain plug seems to be easiest and simple solution, if you're OK with the wire that should be disconnected/connected during oil changes. It takes female spade connector so shouldn't be an issue, but if it's not you who is doing the oil change, then this person should be warned. Dril...

*double post please delete*

Dean, my car doesn't have cooler. I've used this instruction to install senders. Pressure sender can be installed using adapter on the block near firewall where pressure switch is. You can replace pressure switch with pressure sender with double connectors to retain warning lights and connect pressu...

Dean:
Let me know if you're still looking. I do have a spare choke, probably have winngnut and might have the washer for the spare wheel.

Bobbo:
This washer tubing install looks clean.
I will tackle underhood lights when I'l work on insulation. The one I have now doesn't work either, I suspect bad wiring.

Another old and small project: installing the new head unit, running speaker wires and modifying rear speaker pods to accommodate 6x9 speakers. Set up used: Alpine CDE-133BT head unit with 4x6” Pioneer TS-A4670R speakers for the front and 6x9” Pioneer TS-G950M speakers at the rear. At some point, I'...

PM'd.

Welcome to the site! Absolutely stunning pair of cars!

Some time ago I also overhauled windshield washer system. I never liked original over-complicated system with two valves #61661380464 abnormal amount of hidden connectors, Ts etc. https://s19.postimg.cc/l1sqs5g7n/159f42cs-960.jpg So when one of the valves started to leak? I purchased new T-valve #61...

Initially, I wanted to use junkyard cluster with its housing for digital gauges installation. But coating inside of the cluster looked faded to me and since the clear cover was already detached I decided to refresh insides with matte paint. https://s19.postimg.cc/popm2fosz/cluster.02.jpg It didn't g...

Thanks, Ellis!
I have to add that I always admire photos you guys post from Australia from your get togethers.

There is a kit received: https://s19.postimg.cc/4lyix0s43/IMG_20150304_125412309_zpsxosbtkov.jpg https://s19.postimg.cc/4ah2k9bo3/IMG_20150304_125405144_zpspvcbkul9.jpg https://s19.postimg.cc/e9216ql3n/IMG_20150304_125428312_zpsys1lh1ph.jpg https://s19.postimg.cc/qc7cuaw5v/IMG_20150304_125349226_zps...

Dean:
Good idea, I'll look into that.
I don't see any wool insulation on your photos and there is some on mine. Have you removed it as well? The fan looks brand new too. I have a motor coming in but not sure if I have to change it, as original one seems to be still OK.

The next necessary step was the restoration of the central console. During the years, plywood got cracked and got separate from plastic, where glue seems to dry out. https://s19.postimg.cc/k4d4rspxv/c8a0289s-480.jpg This glue from dollar store seems to be working pretty well. I've also used it to gl...

After so many years on the BC it's time to start documenting ongoing work in one thread. https://s19.postimg.cc/vncu1xowj/20161021_162810.jpg Some of the previous projects can be found below: US to Euro bumpers swap US sealed beams headlights to CIBIE CSRs The recent one is the elimination of my ana...

Out of the car and ready to be shipped!

Welcome!
Your car seems to be a twin of mine at birth. I wonder why Nutria interiors were so popular in Canada?
If you're around GTA we can get together, we have bunch of 6ers over there.
Cheers,
Val

Dirk,
Thanks a lot for the feedback. It was a pleasure dealing with you as well!
Good luck with the swap, can't wait to see the results.

Selling set of auxiliary gauges: oil temp (C), oil pressure (bar), voltage (V), installed instead of ashtray. The only reason I sell them is because I went digital and working on installing more discreet set up now. Gauges will be sold together with the black central console insert, where ashtray us...

Selling Blaupunkt BMW Amplifier 65121375983 with plug attached to it. Removed from 1988 635csi, but will work on bunch models build after 09/85. Asking $55 + actual shipping from Toronto, Canada. Local pick up welcome. https://s19.postimg.org/f6idhqj83/20170219_110810.jpg https://s19.postimg.org/u3q...

Selling BMW M30 oil filter housing; was pulled from 1988 635. Asking USD 65 plus actual shipping from Toronto, Canada/ Local pickup welcome. https://s19.postimg.org/g6q4tnu1f/20170219_131711.jpg https://s19.postimg.org/oq9irf2dv/20170219_131755.jpg https://s19.postimg.org/6byznfq37/20170219_131832.j...

bzzzzz wrote:Please message me and address for payment and shipping arrangements for Item #9, the dome light & glove box light.
Thank you.

PM Sent.

Added some new stuff.