bigcoupe.com

This is for a 5 series but it works for 6's also. http://www.mye28.com/tech/DaveKanTransGuide/ You'll need fly wheel, good clutch & pressure plate, throw-out bearing, pedal bracket with pedals complete, cross member, shifter with linkage, clutch hydraulics, drive shaft with center support bearin...

Hi Val,

Engine looks great.

I'm in the process of rebuilding the M30 with upgrades after
blowing the head gasket @ Watkins Glen. I also had the big stuff
powder coated. I'm doing the small stuff in my little oven.

I'll post photos of some stuff when I can.

Bob V

If you have this style radio mount, try pulling the outer rectangle frame around radio off. Then you'll need a removal tool that will slide on both sides to release the tabs holding the radio. here are some styles of tools https://www.amazon.com/s?k=Radio+Removal+Tool&i=electronics&ref=nb_sb...

I'm also installing Ireland headers on my 86. My research came up with installing an x crossover pipe. CO bung can be welded into the x, getting exhaust from both headers and an x pipe helps scavenge the exhaust. https://www.jegs.com/i/Jones-Exhaust/523/SXP2SS/10002/-1 https://www.autoanything.com/e...

Owned my six for 31 years. Never used BMW anti freeze. Zerox or Prestone with https://books.google.com/books?id=wC0DAAAAMBAJ&pg=PA6&lpg=PA6&dq=dupont+anti+rust&source=bl&ots=HhFiN6fGlr&sig=ACfU3U1Get9yXF0d6vKV8oJ87ehKjJ_yGw&hl=en&sa=X&ved=2ahUKEwiM-KrenKLgAhW5CDQI...

Would you want to exert that much pressure on your back stooped that low on

a large number of cars?

I don't think a dent could happen even if they punched the trunk.

However, it would show some respect to the owners if at least they wore gloves.

My $.02

Unless the M is different from the 635CSi, my rockers are stone chip black.
I bought the car in '88.

Re manufactured might be the best option. Hope this list can help. https://moduleexperts.com/modules/bmw-ecu-repair/ https://www.programainc.com/item_list.aspx?ma=44300&mo=44400&ye=24664&idcategory=39 https://www.g7computers.com/collections/vehicle-computer-repair-service/products/bmw-co...

+1, my doors sound the same for 31 yrs.

Haven't installed this yet, the inter graded gauge sold me.

https://www.ebay.com/itm/401359217522

Wow, congrats on the new grandchild. My experience with a Xmas baby. My first wife who passed in '88 was a Xmas baby. Her biggest complaint about her birth date is that her family combined gifts for her birthday and Xmas on Xmas. Now this was back in the late 40's and 50's when we got a gift or two ...

Hope Ron is a candidate for Aorta stents and not full open surgery. I lucked out in 2009 and was able to have the triple A. Second para. Good luck Ron, hope all goes well for a comfortable recovery. Bob V For patients requiring open surgical repair of their aorta, a large incision is made in the abd...

Merry Xmas and Happy New Year to all BigCoupe users.

Pods are reversed. Grills should face outside not inside.

http://www.realoem.com/bmw/enUS/showpar ... Id=65_0077

PM sent to SenorShark

Has anyone removed the 7th injector? It look impossible to get at. Its still original and it occurred to me if its leaking, it would idle ok when it first starts and needs gas but would be too rich as it ran for a while which is exactly what it doing. Yes, very difficult to get that out. IIRC I chi...

" I am looking for an Electrical Diagram set for my 88 model where can I obtain a set please"

http://wedophones.com/Manuals/BMW/1988% ... Manual.pdf

This should be some help in diagnosing your problem.

http://www.hiperformancestore.com/motronic.htm

+1 on the oil pressure check. Use a mechanical gauge, it could be the sending unit.

Ask Sal @ http://rennsportmotorworks.com/

He's an old timer who loves working on old Bimmers.

Tell him Bob V recommended.

Ken,

That brought back memories. I also received the injection
back in 1953 or so in PS 171 Astoria.

Bob V

PS Did you ever have your E24 resprayed?

Brian,

Happy to do it.

Very important info Ken. Thanks for the heads up.

Bob V