I think Red Bull should not bother with the appeal. Apparently, Mercedes, Ferrari and Maclaren (and 2 more teams) were all asked by the FIA to reduce their fuel flow to keep the sensors in range. They did so and Mercedes supposedly lost 0.5sec a lap. Red Bull were also asked to reduce fuel flow by t...
Evans do a preperation fluid as well that can absorb the remaining water: "" Using Evans Prep Fluid. To further ensure that the cooling system is as free from water as possible we recommed Evans Prep Fluid. This hygroscopic fluid absorbs any residual water and removes any loose dirt and sc...
Beaker, I'll be breaking my 1983 635 over the next few weeks. It has the brake master cylinder on the passenger side. I got a brand new Brake Master fitted about six months ago and have probably done less than 500 miles since then. Was struggling to find one and ended up paying about £195 for it. I...
Due to the dreaded tin worm I am now breaking this car. Some pics of the can be found inthis thread here: http://bigcoupe.com/phpBB2/viewtopic.php?p=155807#155807 It is currently still in one piece and has an MOT till May next year but is no longer taxed or insured. Can be test driven at your own ri...
Due to the dreaded tin worm I am now breaking this car. It is currently still in one piece and has an MOT till May next year but is no longer taxed or insured. Can be test driven at your own risk. Heres a pic of some parts I'm selling? I'm based in Hertfordshire, England PM for more info or specific...
How badly will the wrong oil screw up a LSD? When I got the car 14 years ago it was awful in the snow with the wheels spinning like crazy so obviously there was no LSD. Fast forward to a couple of years age when I got an options sheet read out and it says I should have an LSD! I'm afraid the #@*&am...
Hi, Posting these for a friend. Parts came from a 1988 635csi Highline. Based on Ware, Hertfordshire. Simon can be contacted on (07872) 148152. Pair of front struts near complete and in very good condition. Includes ABS sensors, back plates, springs, shocks, top mounts and drop links. Basically what...
I'm needing a new clutch for my car and wanted to know if there is any compatability issues between the different Clutches and Gearboxes. I think mine is a 265/6 gearbox but the car was manufactured in 1983.
Few snippets of the video I took on the day: http://www.youtube.com/watch?v=7UXpR0N0GfM http://www.youtube.com/watch?v=hyDcABNxEd4 http://www.youtube.com/watch?v=X4b5vmL9-TI http://www.youtube.com/watch?v=ao7qddb953Y http://www.youtube.com/watch?v=QHEsqEoMCs4 http://www.youtube.com/watch?v=NYR362gZK...
Bizarrly, Last night I was watching Back to the Future II, and there's a very similar 635csi in that near the start of the film just before the hoverboard chase.
Brucey wrote:three different sets of wheels in as many days, plus various steering tweaks etc have left me with no time to cut my paint back etc BUT it has left me with a working 6er!
whiskeydry wrote:Hi Ben
I'm up for that. I'll come over from Newport Pagnell and meet you at the Little Chef 9.15am. Hopefully get to meet Brucey there as well.
All the best
Phil
Nice one I'll see you there, I should just have enough time to finish watching the F1 before travelling over
Mine is currently reading under and I have noticed the needle rests below zero with the engine off. Would suggest its just adjustment of the dial rather than an electrical problem.
Yes it sounds awesome. Its just the engine and drivetrain are all solid mounted which transmits a lot of noise into the cabin. I'm told it sounds good from the outside though.
Hey there. I've heard a little about the vems. Do you know more Btw that looks a great setup. Did it make good power with the open trumpets. I only really know the Emerald system, There is a chap called Gunni on the www.E30zone.net forum who seems to know Vems really well. At least for fitting to a...
No sure on availability in Aus but I'm using Emerald on my S54 now, originally had it running an M20 on throttle Bodies. But in the UK there are other options such as Omex, Vems, DTA. Prices vary etc but most will require a new engine loom to be made and spliced into the car loom. the Emerald in min...