bigcoupe.com

I have the Hobart 140 mig... https://www.amazon.com/Hobart-500559-Handler-Welder-115V/dp/B009X43F38/ref=sr_1_1?ie=UTF8&qid=1512396746&sr=8-1&keywords=hobart+140 https://www.northerntool.com/images/product/features/15165.jpg -Works great, does what I need it to do.... -it will not weld 1/...

Anyone replace their guides recently ? I did... see next post...

I"m looking to update my exhaust on my m635... I have this and my old systems is pretty rusty. https://i.imgur.com/b91xF8S.jpg I'm thinking about using the supersprint section 1 pipes with a OE muffler https://3a663eb0fef48c6d2d60-a88f8ebfcdb877ad223e888bfcb7f7ec.ssl.cf1.rackcdn.com/838884_x600...

It will need nuts on both sides. Pretty sure if fits in the top mount just fine you'll see once you try to put it in there.

I've used 318 tranny mounts instead also... and they are $7

https://www.ecstuning.com/b-meyle-parts ... 71220~mey/

I always bleed from the bottom up...

like this...

https://www.youtube.com/watch?v=wdf--suwqw0&t=274s

What is a "halo car"


The original hours - 50 at $120 per hour = $6

They billed me for 162 hours totaling $19,440.00.

With parts and tax - $26,582.


Wow! I don't think I would have paid that. I would have walked out and asked for a line itemized bill.

Are these wheels on a Nissan Murano?

sounds like it's been sitting.

I bet those tires are from the 90's or older.

Needs quite a bit of maintenance.... and they body work is $$$

I'd say less that $20k. $15-$18k

my .02

I was speaking to more of the 265/6 cheaper and easier to come buy

The 265/5 Doglegs are great, I have a feeling he doesn't know what that is and what a dogleg will cost..

I assume you are talking about this tranny? https://www.ebay.de/itm/Getrag-260-Getriebe-BMW-M635csi-und-E28-M5-260-0-1302-90/253236885614 1.300 euros is quite a bit of money for a 260. You can buy those for around $400 over here in the US. 260.0.1302.90 is probably a 260 from later e28s/e24s. Not re...

Yes, your m6 should have a 280 Getrag in it. However, finding a 280 that is in good condition is very hard these days. And finding parts to rebuild a 280 is just as difficult. I hear a lot of people swap to a 265 Getrag transmission. Here is a link to a swap.... http://www.mye28.com/viewtopic.php?f=...

Looking to buy an old BMW radio if anyone has one... mine died..

I think it was 5 or 6 inches thick, nothing crazy.

I have it set at 12 feet high I think. but i have a 18ft RV garage under the house. I don't do RV's so....

it was worth the $2500 installed.

for working on German or British.

$120 an hour that's what the dealer charges around here. So you agreed to nearly $10,000 for the following? (let me guess what hour would be on the following I don't have a service book or there might not be on these) 1) replace all front suspension parts. 10 piece set from FCP Euro including steeri...

That's why I have a lift in my garage. I wouldn't trust anyone to do this work.


This would not be cheap unless they are very versed in e24s even then... I guess $11k

Guess we really need to see the bill to make an assessment. M6 parts are not cheap... Try doing a timing job for under $2500... $1500 would just be parts. "Euro Evo exhaust cam gear on my '87 M6 and to do the Miller MAF conversion with War chip installation"... I have a feeling this would ...

I have one I'll sell at $50!

What did it cost? I know most charge around $1200 for the service.

You can buy 3 or 4, e30/e28/e24 diffs for that money. Though it would crap shoot if they were good.

I've heard good things about diffs online also.

Ah, the M1 / M535 wheel. I sold one of those that came in a lot of parts I had. The Hub cover is kinda of strange not sure how you would fit it to a late e24/e28. But I'm sure if could be done.

I have a 85 with an M88 I would like to convert to dual chain.... Subscribed...

I thought you could use a magnet?

here is a good guide on upgrading sealed beams.. on an e30 which is similar to the e24 https://www.r3vlimited.com/board/showthread.php?t=371831 Sealed Beam Upgrade Options Option 1: Hella H1 BiFocal/H4 Conversion/Cibie’s, ~$125-200 Low only, $250-400 Low and High This will convert the sealed beam ho...