Help Support

braided hoses for brakes

Post in this forum for topics relating to suspension, steering, and brakes

Moderators: ron, bfons, GRNSHRK

Post Reply
Posts: 6
Joined: Fri Oct 12, 2018 1:03 am
Location: victoria

braided hoses for brakes

Post by bm0635 » Wed Nov 07, 2018 2:02 am

braided hoses for brakes - m635, suggestions for front and rear, what are the best types



User avatar
Bigcoupe supporter
Posts: 656
Joined: Sat Feb 27, 2010 10:50 pm
Location: NZ

Re: braided hoses for brakes

Post by jps635 » Wed Nov 07, 2018 7:08 am

Wouldn't know if they're the best but I got a set of Goodridge hoses from the UK - good quality. Whatever you buy make sure they're DOT approved
'85 635csi JPS (RA2-66)

Bigcoupe Contributor
Posts: 963
Joined: Sun Nov 23, 2014 7:38 am
Location: Perth Australia

Re: braided hoses for brakes

Post by baders » Wed Nov 07, 2018 11:36 pm

Check with Garagistic. Their E28 stainless lines may fit ? ... -compliant
1986 635csi LOCUTUS / Arktis Blau Metallic / Pearl Beige / S38B36/ Close ratio dogleg 5sp
2002 E46 M3 / Topaz Blau Metallic / Black Nappa / 6 speed SMG software tuned / Bilstein PSS10 Coilovers

Bigcoupe supporter
Posts: 371
Joined: Sun Oct 04, 2009 10:50 am
Location: New South Wales Australia

Re: braided hoses for brakes

Post by m6dave » Sat Nov 10, 2018 6:51 am

Hi Richard
The hose fitting in the front calipers is different on the M635 compared to other models. Make sure you get a kit specific for M635 M6 or E28 M5; if it says it also fits 635CSI then it’s not the correct kit. I bought Goodridge lines from the UK with the DOT labels and these passed rego ok with the engineers certificate.

Some local brake repair shops are licensed to make them.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests