Help Support

New brake lines done.

Post in this forum for topics relating to suspension, steering, and brakes

Moderators: ron, bfons, GRNSHRK

Post Reply
Ronnie Wilson
Bigcoupe supporter
Posts: 117
Joined: Fri Nov 18, 2016 11:40 pm
Location: Liverpool uk

New brake lines done.

Post by Ronnie Wilson » Sun Apr 16, 2017 10:47 am

Well finally completed making up new rear brake lines with 4.75 Din flaring tool, straightening tool and bending pliers.
Bought all the tooling and one side of brake line from ebay.
Managed to obtain rear passenger side brake pipe from local Bmw dealer with both ends already flared and straighten it out using the tool and bend to the same as the original.
The flaring tool did the job, but when doing the second flare one of the 6mm locking down bolts sheared of. Luckily I managed to remove it and substitute it with a standard 6mm bolt.
If your just doing a couple of flares then its not to bad. But if i worked in a garage doing it regularly I would invest in a professional tool.
IMG_0203.PNG (1.31 MiB) Viewed 1015 times
Liverpool uk.
1986 635csi

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests