?120 + each!monoi wrote: OEM are available from your local bmw dealer.
rear wheel bearing replacement?
Moderators: GRNSHRK, ron, bfons
The problem with the rings is that you have to remove the stub axles to get at the ring. When I put my rear end back together, I forgot to put on the brake backing plates. That also meant removing the stub axles, which pulled out the center of the new bearing. Plan on replacing the bearing along with the ring.
Jose
Jose
1987 M6 - My dream car
-
- Posts: 2072
- Joined: Wed May 23, 2007 11:31 pm
- Location: Baltimore .Md HON
Re: rear wheel bearing replacement?
What is the Torque for the Allen bolts that hold the Axel on to the Hubs.
1981 635 German FRANKEN6ER gray market RIG, 1988 635,91 Nissan 240SX , 1993 Harley 1340ccFXR Super Glide, 2000 M2 Buell 1200cc.
-
- Platinum Member
- Posts: 3312
- Joined: Thu Sep 28, 2006 9:28 pm
- Location: scottsdale, arizona
- Contact:
Re: rear wheel bearing replacement?
Bobby if you can't get it, google torque settings for... put in the size of the bolt such as 12mm or what ever it is and it will give them to you. IIRC torque settings are based on bolts size. Other wise use the old method of tighten it all the way and give it one last pull and you will feel the bolt "stretch" not a gigantic pull or you will break the bolt. Just enough to feel it stretch. The google method works great
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
flickr.com/photos/bertsphotos.