Door wiring harness rubber cover
Moderators: GRNSHRK, ron, bfons
Door wiring harness rubber cover
Hi all, The rubber tube covering the electrical wiring harness between the door and the body has come apart. I hope I have described this will enough. Anyone know where I can find these things. I need one for each door. Thanks, Ron
I tried to find these rubber "concertina" sleeves a while ago and think that they only come with the loom. The big problem, on replacing them, is removing all the plugs and sockets
to allow the wires to pass through the sleeve. I've successfully superglued the splits on my sleeves. Let us know if you manage to find new ones.
to allow the wires to pass through the sleeve. I've successfully superglued the splits on my sleeves. Let us know if you manage to find new ones.
They are ALWAYS rustier than you thought!!!!!!
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
I spent ages chasing new ones too but had no luck. Gummi fledge softens them back up and brings back the lustre on the rubber. If they are really split badly you might be able to tape them with look tape or some rubber self vulcanizing tape.
I also noticed that there is a discolouration on the door pillar where the rubber boots sit when the door is closed, it was fine for a while after I repainted the pillar but now it has come back. I've seen several other cars with this as well, has anyone got a solution to stop this discoloration?
I also noticed that there is a discolouration on the door pillar where the rubber boots sit when the door is closed, it was fine for a while after I repainted the pillar but now it has come back. I've seen several other cars with this as well, has anyone got a solution to stop this discoloration?