I'm replacing my B34 with a B35 from a 92 735i. I have searched this and E28.com, but can't find anything on how much of the engine wiring harness I need from the 735 to use in my 83 633. I know I will have to lengthen the harness because the DME is in the glove box, rather than under the hood. The round plugs that attach to the engine are needed, and I definitely need the part that runs to the OBD1 plug.
I have the entire under hood harness, but it runs across the front bumper and has lighting wires and all manner of stuff I doubt I need. Any guidance would be greatly appreciated. Thanks in advance.
M30B35 from 735i into my E24
Moderators: GRNSHRK, ron, bfons
-
- Posts: 6
- Joined: Tue Oct 20, 2015 11:03 pm
- Location: Virginia Beach, VA
M30B35 from 735i into my E24
Money can't buy you happiness,
But it can buy you horsepower,
And that's kind of the same thing...
But it can buy you horsepower,
And that's kind of the same thing...
Re: M30B35 from 735i into my E24
Might be easier to find a harness from an '88 or '89 635, "might" being the operative word.
Dean
Lutz, FL
'85 635 CSi Euro #9402254
'87 Spider Veloce
'92 Spider Veloce
'08 350Z
Lutz, FL
'85 635 CSi Euro #9402254
'87 Spider Veloce
'92 Spider Veloce
'08 350Z
-
- Posts: 6
- Joined: Tue Oct 20, 2015 11:03 pm
- Location: Virginia Beach, VA
Re: M30B35 from 735i into my E24
Thats a good call. I will keep my eyes open for one. Thanks.
Money can't buy you happiness,
But it can buy you horsepower,
And that's kind of the same thing...
But it can buy you horsepower,
And that's kind of the same thing...