I've had a small coolant leak and have ordered replacement hoses from BMW which should correct the problem as the lower hose from the thermostat housing to the heater core had a pin hole at the clamp at the housing. Original hose! build date 11/88.
While inspecting the expansion tank, see attached photo, I noticed a repair by the PO who used Butt connectors, it works but needs to be replaced. When ordering the hoses I asked the BMW parts man, he was no help. I've search the forum and realoem no luck.
If someone knows and/or the connector number kindly share.
TIA, Roger
connector for coolant leveling switch
Moderators: GRNSHRK, ron, bfons
-
- Bigcoupe Contributor
- Posts: 323
- Joined: Wed Sep 10, 2014 12:08 am
- Location: Arden, NC 28704
connector for coolant leveling switch
89 635CSiA (11/88 build)
AlpineWeiss II (218)/Natur(0200)
87 L6 635CSI Sold
87 MB 560SL Sold
AlpineWeiss II (218)/Natur(0200)
87 L6 635CSI Sold
87 MB 560SL Sold
Re: connector for coolant leveling switch
Roger,
Found these on RealOEM. Not sure if this helps...
61-13-1-368-621
61-13-1-359-289
61-13-1-355-496
Found these on RealOEM. Not sure if this helps...
61-13-1-368-621
61-13-1-359-289
61-13-1-355-496
1985 635CSi M Euro M88
Re: connector for coolant leveling switch
I believe you can get the individual connector ends for the wire as well, at least I could on my old e30 when I replaced the sensor on it. I picked up those items from the dealer fairly cheap.
'85 635csi - Dark Shark
'16 F150
'13 Subaru BRZ
'16 F150
'13 Subaru BRZ