Any take one out?
Not sure how cable and harness are removed?
Harness straight pull?
Bowden Cable...twist?
Have to remove due to years of PS leaking all over it from above and just a sopping mess need to clean all up!
Thx
Cruise control dismantle
Moderators: GRNSHRK, ron, bfons
-
- Platinum Member
- Posts: 3710
- Joined: Thu Apr 08, 2004 3:24 pm
- Location: Gilroy (SF Bay Area) CA
Re: Cruise control dismantle
Geez Pablo, crickets
Just have at it, my good friend
Just have at it, my good friend
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Re: Cruise control dismantle
I have an M6 so I can't help much, but in mine the cable connects directly to the throttle linkage. You just loosen the nut an disengage from the throttle arm/mount. Then pull the metal clip from the connector and un-couple the electrical plug. As I recall, the motor assembly is mounted with 3 bolts.
Jose
Jose
1987 M6 - My dream car