injectors 1982 635 csi euro manual in australia

Post here for mechanical and engine topics such as fuel issues, transmission problems, rough idle, exhaust, electrical issues, etc

Moderators: GRNSHRK, ron, bfons

Post Reply
station105
Posts: 155
Joined: Tue Mar 16, 2010 7:15 am
Location: australia

injectors 1982 635 csi euro manual in australia

Post by station105 »

Richard – Your Bosch 0280150130 is very specific at 203 cc/min, 3 Bar of pressure and 2.25 Ohms.

this is what i got back from five0motorsport - re replacement injectors.
i sent them the number on the injectors that came out of my car
i have the original box that my injectors came out of, replaced 3 of them 20 years ago when i was told that 3 leaked.
13 64 1 286 026 - 0 280 150 130 300, they say they do not have anything that will cross/reference to this number
need some feedback to what to buy from info given to me, i believe mine are low impedance, and my son says the others are leaking.
car has been sitting for 5 years and i am about to start to bring her back to life.
they want about $180 to clean them, so i thought about i may as well buy new ones at a third of the price, 4 pintel instead of 1.
need t\you guys to chime in and let me know what to get

regards

richard
User avatar
panthercity
Posts: 89
Joined: Tue Jul 12, 2016 2:52 am
Location: Fort Worth, Texas

Re: injectors 1982 635 csi euro manual in australia

Post by panthercity »

Richard,
I had the low-impedance injectors on my '83 635 rebuilt after finding no replacements available. It is likely your best option. They should also flow test them to see if they are well matched.

You can measure the impedance of your injectors to know for sure if they are low(~2.5Ohm) or high(~15Ohm) injectors and they are not interchangeable.

My '85 635 has high impedance injectors which have many options for aftermarket replacements. On that car I "upgraded" to a 4 hole injector and didn't notice any difference in how the car ran. At the time I was refurbishing many different components on the engine so it was hard to tell what was the impact of the injector change was.

Regards,
Tony
'85 635CSi Euro
Image
User avatar
jps635
Platinum Member
Platinum Member
Posts: 872
Joined: Sat Feb 27, 2010 10:50 pm
Location: NZ

Re: injectors 1982 635 csi euro manual in australia

Post by jps635 »

These are what I put in my 84/85 M30B34:
Ford 19lb Injectors - 0280155710 - F6VE (Bosch) https://www.fiveomotorsport.com/0280155 ... ion-3-19lb

Their part numbers have now changed I think, so check.
'85 635csi JPS (RA2-66)
User avatar
603racing
Posts: 462
Joined: Mon Dec 20, 2010 5:11 pm
Location: Barry, IL

Re: injectors 1982 635 csi euro manual in australia

Post by 603racing »

I put the same 4 pintle "ford" yellow top injectors in my '84 Euro with the b34. They worked fine.
'85 635csi - Dark Shark
'16 F150
'13 Subaru BRZ
Post Reply