Richard – Your Bosch 0280150130 is very specific at 203 cc/min, 3 Bar of pressure and 2.25 Ohms.
this is what i got back from five0motorsport - re replacement injectors.
i sent them the number on the injectors that came out of my car
i have the original box that my injectors came out of, replaced 3 of them 20 years ago when i was told that 3 leaked.
13 64 1 286 026 - 0 280 150 130 300, they say they do not have anything that will cross/reference to this number
need some feedback to what to buy from info given to me, i believe mine are low impedance, and my son says the others are leaking.
car has been sitting for 5 years and i am about to start to bring her back to life.
they want about $180 to clean them, so i thought about i may as well buy new ones at a third of the price, 4 pintel instead of 1.
need t\you guys to chime in and let me know what to get
regards
richard
injectors 1982 635 csi euro manual in australia
Moderators: GRNSHRK, ron, bfons
-
- Posts: 155
- Joined: Tue Mar 16, 2010 7:15 am
- Location: australia
- panthercity
- Posts: 89
- Joined: Tue Jul 12, 2016 2:52 am
- Location: Fort Worth, Texas
Re: injectors 1982 635 csi euro manual in australia
Richard,
I had the low-impedance injectors on my '83 635 rebuilt after finding no replacements available. It is likely your best option. They should also flow test them to see if they are well matched.
You can measure the impedance of your injectors to know for sure if they are low(~2.5Ohm) or high(~15Ohm) injectors and they are not interchangeable.
My '85 635 has high impedance injectors which have many options for aftermarket replacements. On that car I "upgraded" to a 4 hole injector and didn't notice any difference in how the car ran. At the time I was refurbishing many different components on the engine so it was hard to tell what was the impact of the injector change was.
Regards,
Tony
I had the low-impedance injectors on my '83 635 rebuilt after finding no replacements available. It is likely your best option. They should also flow test them to see if they are well matched.
You can measure the impedance of your injectors to know for sure if they are low(~2.5Ohm) or high(~15Ohm) injectors and they are not interchangeable.
My '85 635 has high impedance injectors which have many options for aftermarket replacements. On that car I "upgraded" to a 4 hole injector and didn't notice any difference in how the car ran. At the time I was refurbishing many different components on the engine so it was hard to tell what was the impact of the injector change was.
Regards,
Tony
Re: injectors 1982 635 csi euro manual in australia
These are what I put in my 84/85 M30B34:
Ford 19lb Injectors - 0280155710 - F6VE (Bosch) https://www.fiveomotorsport.com/0280155 ... ion-3-19lb
Their part numbers have now changed I think, so check.
Ford 19lb Injectors - 0280155710 - F6VE (Bosch) https://www.fiveomotorsport.com/0280155 ... ion-3-19lb
Their part numbers have now changed I think, so check.
'85 635csi JPS (RA2-66)
Re: injectors 1982 635 csi euro manual in australia
I put the same 4 pintle "ford" yellow top injectors in my '84 Euro with the b34. They worked fine.
'85 635csi - Dark Shark
'16 F150
'13 Subaru BRZ
'16 F150
'13 Subaru BRZ