Page 1 of 1

A/C decals

Posted: Thu Jun 28, 2018 3:24 pm
by 88m6
Cleaned up under hood with new pads ,polish ,grills etc n had to remove parts n AC decal.
Genuine Parts was easy replacement but AC now available thru various parts suppliers is different #. Mine actually showed on euro m but NLA. Question is does it make a difference really?
Mine shows 3.69 which I assume is amount of refrigerant ? New ones show 2.37 . Also new ones are black not red as OE.
m6 / m635 owners what do u have?

Re: A/C decals

Posted: Thu Jun 28, 2018 4:24 pm
by GRNSHRK
Pablo, I'll tell you where you can obtain the correct A/C decal, if you tell us the story behind the red M6 [-o<

OK, shucks, here ya go #-o

http://www.pukardesigns.com/

And tell Kos that ole Bobbo sent you =D>

Re: A/C decals

Posted: Thu Jun 28, 2018 4:46 pm
by 88m6
Thx Bob ,
Site keeps crashing ,I'll investigate other ways getting in touch. C has Facebook acct.

I sent an email last nite thru bcadmin? Re M6

Still curious as to "charge" different numbers on those decals ,assume it's Freon capacity?

Re: A/C decals

Posted: Thu Jun 28, 2018 6:49 pm
by GRNSHRK
Paul, I have never been successful sending an email using the Big Coupe site, so please use my work E addy:

[email protected]

Pat ordered a replacement A/C label for his M635 and specified how many pounds of charge was required to be read on the label, as Kos will do them custom for us =D>

Drop him a line, again tell him that I sent you from Big Coupe :-"

He did us well, VERY well \:D/

Re: A/C decals

Posted: Sat Jun 30, 2018 9:58 pm
by PTFunk
88m6 wrote: Thu Jun 28, 2018 4:46 pm Still curious as to "charge" different numbers on those decals ,assume it's Freon capacity?
Paul - I recently went through an A/C rejuvenation and can confirm that 1675g / 3.69 lbs. is the original M6 fill level for R12. See the pic of my original sticker (which was removed soon after) below. Luckily I saved this pic and found it again right before this A/C work, because the repro sticker that I bought shows the wrong capacity (duh... don’t know why I didn’t notice that minor detail).

My car was converted to R134a about 12 years ago, and the consensus is that the R134a fill level (weight) is about 80% that of the R12 value. This appears to have worked in my car so far... it blows cold but no blown seals (yet!).

Re: A/C decals

Posted: Tue Jul 03, 2018 1:27 am
by 88m6
Thanks Paul ,will probably use that to recreate .

Re: A/C decals

Posted: Thu Jul 19, 2018 1:14 am
by kos
hi


i can make these to order with the correct charge level on them


£8 plus shipping

Re: A/C decals

Posted: Thu Jul 19, 2018 1:27 am
by 88m6
Thanks I'll take one of the ones posted above,
I assume you have the template .
Part 1 380 728 above is same as mine used to be.
93446, ca
Could also use 3 power steering labels?
[email protected]

Re: A/C decals

Posted: Sat Jul 21, 2018 11:35 pm
by kos
PM Sent

Re: A/C decals

Posted: Sun Jul 22, 2018 1:17 am
by 88m6
I do not see pm here or at aol.com acct

Re: A/C decals

Posted: Sun Jul 22, 2018 3:28 pm
by dlvad

Re: A/C decals

Posted: Sun Sep 16, 2018 12:20 am
by kos
as above

email is the best way to contact me for stickers

[email protected]

Kos

Re: A/C decals

Posted: Tue Sep 18, 2018 4:51 pm
by Tommys 89 635
Kos,

I'll need a new ac sticker or my 89 635 but i'll send you a pic and email

thanks

Re: A/C decals

Posted: Wed Sep 19, 2018 1:30 am
by kos
cool,

beast email is

[email protected]


Kos