Sanden 508 adapter brackets

Post here for mechanical and engine topics such as fuel issues, transmission problems, rough idle, exhaust, electrical issues, etc

Moderators: GRNSHRK, ron, bfons

Post Reply
baders
Platinum Member
Platinum Member
Posts: 1084
Joined: Sun Nov 23, 2014 7:38 am
Location: Perth Australia

Sanden 508 adapter brackets

Post by baders »

Hi all. Laid up at the moment and doing some research into restoring the A/C on LOCUTUS. I am in touch with Will Nolan, who makes the brackets to adapt the Sanden A/C compressors to our cars. I would like to gauge interest in this so that we might put a group buy together with a few numbersto make it more worthwhile for him to do this. I'm in;

Baders.
1986 635csi LOCUTUS / Arktis Blau Metallic / Pearl Beige / S38B36/ Close ratio dogleg 5sp
2002 E46 M3 / Topaz Blau Metallic / Black Nappa / 6 speed SMG software tuned / Bilstein PSS10 Coilovers / CMP RACP reinforcement
kiwi.bloke
Posts: 22
Joined: Sun May 11, 2014 9:35 am
Location: Brisbane

Re: Sanden 508 adapter brackets

Post by kiwi.bloke »

Also in
1982 E24 635CSi (UK Spec, 5 speed)
2010 JCW WC50 (#274)
baders
Platinum Member
Platinum Member
Posts: 1084
Joined: Sun Nov 23, 2014 7:38 am
Location: Perth Australia

Re: Sanden 508 adapter brackets

Post by baders »

My apologies, I should have updated this thread. I have a bit of a fitment problem with these brackets. The bottom radiator hose and ali housing on the S38B36 will not allow easy installation of a Sanden compressor. Currently trying to work out what to do.
Attachments
compressor_fitment02.jpg
compressor_fitment02.jpg (629.78 KiB) Viewed 1935 times
1986 635csi LOCUTUS / Arktis Blau Metallic / Pearl Beige / S38B36/ Close ratio dogleg 5sp
2002 E46 M3 / Topaz Blau Metallic / Black Nappa / 6 speed SMG software tuned / Bilstein PSS10 Coilovers / CMP RACP reinforcement
Post Reply