Help Support Bigcoupe.com

Cruise Control and OBC issues after Inst. Cluster repair

Post here for mechanical and engine topics such as fuel issues, transmission problems, rough idle, exhaust, electrical issues, etc

Moderators: ron, bfons, GRNSHRK

Post Reply
User avatar
wogden700
Posts: 31
Joined: Fri Mar 08, 2019 3:39 pm
Location: Massachusetts

Cruise Control and OBC issues after Inst. Cluster repair

Post by wogden700 » Thu Apr 25, 2019 9:30 pm

I had my Instrument cluster removed and sent out to have the batteries replaced and the odo gears fixed.
After it went back in the car the cruise control and the fuel usage info on the OBC have stopped working. Specifically the range is frozen at 293, and the avg MPG, avg MPH were frozen, so i reset them and now they read "---". The instant economy gauge on the cluster still works, so does the speedo and the ODO
Going through the troublshooting manual I found here on the site it seems the Cruise control and ODC both are dependent on speed info from the cluster.
This removal and install was done by a reputable BMW shop near me and he sent the cluster out to a company in Virginia for that work. He's reaching out the them, but I hoped someone here might have seen this before.

Thanks!
1985 635CSi Diamondblack/Llama
1991 750iL (sold)

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests