Hi everyone
I've searched a bit to try and find an answer on this one but to no avail so far.
We have an 86 635csi and we're doing a manual conversion on it. The box we've acquired is a G265/6 with the sheet metal shifter and thanks to some great info on here, I'll be rebuilding it and making a few upgrades on it before installing it in the car.
Looking under the car through, there is a bracket mounted at the back of the hole where the gear stick goes into the car. From real OEM it looks like its the mount for the back of the aluminium style shifter.
My question is probably a stupid one, but does the back of the sheet metal shifter mount to the car anywhere or does it float free?
Cheers
Mark
Manual Conversion - Shifter Mount Question
Moderators: GRNSHRK, ron, bfons
Re: Manual Conversion - Shifter Mount Question
Is a a while ago I played with mine but this should help
http://www.realoem.com/bmw/enUS/showpar ... Id=25_0143
http://www.realoem.com/bmw/enUS/showpar ... Id=25_0143
'85 635csi JPS (RA2-66)
Re: Manual Conversion - Shifter Mount Question
Thanks, yes I saw this one as well.
Does anyone know if part number 11 or 12 bolts onto the car anywhere?
Does anyone know if part number 11 or 12 bolts onto the car anywhere?
Re: Manual Conversion - Shifter Mount Question
'85 635csi JPS (RA2-66)
Re: Manual Conversion - Shifter Mount Question
Brilliant, thanks. Great picture, gives me all the detail I need.
- Slownrusty
- Posts: 651
- Joined: Wed Apr 24, 2019 2:22 pm
- Location: Houston, TX
Re: Manual Conversion - Shifter Mount Question
I just finished installing a short shifter in my '86 CSi..and have a bunch of pictures and videos that I can share as well.
Yasin
"ole skool, I wouldn't have it any other way"
"ole skool, I wouldn't have it any other way"
- Tim Bradham
- Posts: 47
- Joined: Thu Aug 29, 2013 12:51 pm
- Location: Fayetteville, N.c.
- Contact:
Re: Manual Conversion - Shifter Mount Question
How do you like that shifter, does it tighten up the shifts . Was wanting to replace mine in my ‘82 Euro.. Thanks TimSlownrusty wrote: ↑Sat May 25, 2019 11:31 am I just finished installing a short shifter in my '86 CSi..and have a bunch of pictures and videos that I can share as well.
"Bradham's Design"
-
- Posts: 797
- Joined: Wed Sep 01, 2010 3:29 pm
- Location: Broomfield, CO
Re: Manual Conversion - Shifter Mount Question
on my e28 (88/535is) manual swap I had to weld the bracket to the tunnel.. removed paint and under coat first.
- 12 535i
- 92 325ic
- 92 325ic