G265 Sheet Metal Shifter looks weird
Moderators: GRNSHRK, ron, bfons
G265 Sheet Metal Shifter looks weird
Hi everyone
Managed to source a Getrag 265/6 box to do the manual swap in the 635csi and i'm struggling to see how the gear linkage attaches to the gearbox. Its the sheet metal type and looks like its missing the wings on the bottom??? I've attached a photo.
The only thing I can think of is that its for a different car? Was told the whole lot came off an 85 635csi so i'm stumped.
Any ideas?
Cheers
Mark
Managed to source a Getrag 265/6 box to do the manual swap in the 635csi and i'm struggling to see how the gear linkage attaches to the gearbox. Its the sheet metal type and looks like its missing the wings on the bottom??? I've attached a photo.
The only thing I can think of is that its for a different car? Was told the whole lot came off an 85 635csi so i'm stumped.
Any ideas?
Cheers
Mark
Re: G265 Sheet Metal Shifter looks weird
IIRC there are two small aluminium adaptor blocks, each of which has two 6mm dia holes in it, (edit; maybe they are actually 8mm...?) which are set at right angles to one another. One hole secures the adaptor to the back of the gearbox, the other to the sheet metal 'console'.
ISTR that you can see these parts on the relevant ETK
cheers
ISTR that you can see these parts on the relevant ETK
cheers
Last edited by Brucey on Sat Sep 07, 2019 9:43 pm, edited 2 times in total.
~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Re: G265 Sheet Metal Shifter looks weird
http://bmwfans.info/parts-catalog/E24/E ... #1202842_1
Page 3 http://www.autosolutions.net/installati ... all_3.html
Page 5 - lower left http://www.autosolutions.net/installati ... all_5.html
https://www.wallothnesch.com/en/catalog ... 5111202842
https://www.ebay.com/itm/For-BMW-E12-E2 ... 0794104313
Page 3 http://www.autosolutions.net/installati ... all_3.html
Page 5 - lower left http://www.autosolutions.net/installati ... all_5.html
https://www.wallothnesch.com/en/catalog ... 5111202842
https://www.ebay.com/itm/For-BMW-E12-E2 ... 0794104313
'85 635csi JPS (RA2-66)
Re: G265 Sheet Metal Shifter looks weird
Thanks fellas.
Yes, I already have the small mounting blocks and all the other bits. My problem is I have no holes in the sheet metal shifter to mount the small blocks too (i.e. the vertical ones). I've added some more photos so you can get a better idea of what i'm referring to.
To me it all looks like one piece or is there something that should bolt onto the holes in the side of it? Or is this car making me go mad?
Cheers
Mark
Yes, I already have the small mounting blocks and all the other bits. My problem is I have no holes in the sheet metal shifter to mount the small blocks too (i.e. the vertical ones). I've added some more photos so you can get a better idea of what i'm referring to.
To me it all looks like one piece or is there something that should bolt onto the holes in the side of it? Or is this car making me go mad?
Cheers
Mark
Re: G265 Sheet Metal Shifter looks weird
the adaptor blocks bolt to the holes in the side of the sheet metal part. In this picture
http://2009.bmwfans.info/parts/catalog/ ... _parts-2/#
the adaptor block is shown in the wrong orientation I think.
cheers
http://2009.bmwfans.info/parts/catalog/ ... _parts-2/#
the adaptor block is shown in the wrong orientation I think.
cheers
Last edited by Brucey on Sat Sep 07, 2019 10:16 pm, edited 2 times in total.
~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Re: G265 Sheet Metal Shifter looks weird
Hi Brucey
Thanks but I couldn't open the picture unfortunately.
Cheers
Mark
Thanks but I couldn't open the picture unfortunately.
Cheers
Mark
Re: G265 Sheet Metal Shifter looks weird
it might work better now
cheers
cheers
~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Re: G265 Sheet Metal Shifter looks weird
Hi Brucey
Thanks Brucey, (face palm). I think I have it. Like this?
Cheers
Mark
Thanks Brucey, (face palm). I think I have it. Like this?
Cheers
Mark
- hornhospital
- Platinum Member
- Posts: 2940
- Joined: Sun Jul 11, 2010 6:46 pm
- Location: Silverhill, AL
- Contact:
Re: G265 Sheet Metal Shifter looks weird
You got it!
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
- zinnocoupe
- Posts: 506
- Joined: Fri Sep 19, 2014 12:57 am
- Location: Vancouver BC
Re: G265 Sheet Metal Shifter looks weird
From your photo I actually think you have those blocks oriented incorrectly. These two sheet metal consoles I have from 265/6 trannies are just as they came off the transmissions. They look to be set up oppositely. Maybe it makes no difference at all. Maybe enough difference to cause some issue. Just thought I'd post these pics. Let us know how your swap goes. With pics!!
IMG_7230 by Dave Grayson, on Flickr
IMG_7229 by Dave Grayson, on Flickr
IMG_7230 by Dave Grayson, on Flickr
IMG_7229 by Dave Grayson, on Flickr
Re: G265 Sheet Metal Shifter looks weird
FWIW I agree
cheers
cheers
~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~