1981 635csi coil to distributor lead

Post here for mechanical and engine topics such as fuel issues, transmission problems, rough idle, exhaust, electrical issues, etc

Moderators: GRNSHRK, ron, bfons

Post Reply
smeats
Posts: 13
Joined: Thu Aug 17, 2017 6:48 pm
Location: Scotland

1981 635csi coil to distributor lead

Post by smeats »

Hi everyone,
I am having great difficulty getting a replacement ignition lead from the coil to distributor for my 1981 635csi! (the one I have is not OME and keeps popping off) I tried my local BMW dealer first but they told me all they could supply was the cable plugs and I'd have to assemble myself! I looked at the HT harness sets online and bought one but it didn't fit as it had male plugs and mine needs female connections. I then bought another set from ebay Germany and although I checked fitment it was another wrong plug type plus the coil to distributor lead was far too short! (mine is about 40 to 50 cm) W&N have harnesses at over £200 but they don't include the lead I want! Can someone here please point me in the right direction? [-o<
Thanks in advance
Alan
1981 635CSI series 1
ron
Platinum Member
Platinum Member
Posts: 4569
Joined: Sat Jul 10, 2004 11:35 am
Location: South Wales U.K.

Re: 1981 635csi coil to distributor lead

Post by ron »

You have PM.
They are ALWAYS rustier than you thought!!!!!!
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
Post Reply