Addam Smith JPS Group C Replica Build

Document your Sixer project here.

Moderators: GRNSHRK, ron, bfons

Post Reply
User avatar
Ozibimmer
Posts: 795
Joined: Wed Aug 08, 2012 11:56 am
Location: Gold Coast, Australia
Contact:

Addam Smith JPS Group C Replica Build

Post by Ozibimmer »

Hi Guys
Some of you might know me through the Post I do.
I have been recently very busy with my new Restoration and Race shop in Queensland Australia.
Its called Bavarian Classics and Restorations and is doing really well with lots of old Classics coming through.
Well I have started a new project Called JPS Group C Build
I am building 5 cars up
One is my LHD Alpina now being turned into a Full Replica JPS,then there is my Right hand drive one.
Denis Mamo and Shipper I am also building for as well another member here Trevor Brown.
This will be on my 2 Cars I am Building for me and all the work going into building the kits up from scratch. I have had Denis Mamo help with the 3 D Scanning and getting the KITs perfect.
I am selling a few kits overseas so if your interested please PM me they will be $2500 and only 3 more will be available world wide.
Here are some picture of my right hand drive with the other kit that's a Group 2 Kit.
I have been using the car to get the right ride height and wheel width.
I am using Simmons 3 piece Rims made here in Australia with 10 inch front and 10 inch rear.
Attachments
61736745_10157457530633140_946013881778569216_n.jpg
61736745_10157457530633140_946013881778569216_n.jpg (34.23 KiB) Viewed 9107 times
61676288_10157457532203140_6542376892899524608_n.jpg
61676288_10157457532203140_6542376892899524608_n.jpg (30.5 KiB) Viewed 9107 times
61635758_10157444147128140_6302727484538355712_n.jpg
61635758_10157444147128140_6302727484538355712_n.jpg (41.77 KiB) Viewed 9107 times
61430763_10157444147278140_7291799259567882240_n.jpg
61430763_10157444147278140_7291799259567882240_n.jpg (96.73 KiB) Viewed 9107 times
_________________________
77 E3 3.0SI
77 E24 633CSi
78 E23 728i
79 E24 633CSi
80 E24 635CSi
82 E24 635csi Race Car Build (Schnitzer Replica) viewtopic.php?t=21792
82 E28 JPS (1 of 2 Ever Built)
85 E30 JPS
User avatar
Ozibimmer
Posts: 795
Joined: Wed Aug 08, 2012 11:56 am
Location: Gold Coast, Australia
Contact:

Re: Addam Smith JPS Group C Replica Build

Post by Ozibimmer »

A few More
Attachments
My Experimental car for set up
My Experimental car for set up
64583714_2350897198528383_2800179713325137920_n.jpg (99.95 KiB) Viewed 9106 times
64238025_10157475767343140_199702785124466688_n.jpg
64238025_10157475767343140_199702785124466688_n.jpg (65.66 KiB) Viewed 9106 times
62551327_10157481824508140_7528554418317295616_n.jpg
62551327_10157481824508140_7528554418317295616_n.jpg (23.21 KiB) Viewed 9106 times
This will be the end result
This will be the end result
57736479_10157338250843140_2030657535366660096_n.jpg (84.09 KiB) Viewed 9106 times
_________________________
77 E3 3.0SI
77 E24 633CSi
78 E23 728i
79 E24 633CSi
80 E24 635CSi
82 E24 635csi Race Car Build (Schnitzer Replica) viewtopic.php?t=21792
82 E28 JPS (1 of 2 Ever Built)
85 E30 JPS
User avatar
Ozibimmer
Posts: 795
Joined: Wed Aug 08, 2012 11:56 am
Location: Gold Coast, Australia
Contact:

Re: Addam Smith JPS Group C Replica Build

Post by Ozibimmer »

Playing with wheels
Simmons 5.5 outer
4.5 inners
16 inch
This is just the proto body kit the flares are smaller and not a deep as the real car setup
Attachments
50104263_10157095777353140_1709049301910421504_n.jpg
50104263_10157095777353140_1709049301910421504_n.jpg (122.21 KiB) Viewed 9106 times
64382226_2350897401861696_8679012875144003584_n.jpg
64382226_2350897401861696_8679012875144003584_n.jpg (80.63 KiB) Viewed 9106 times
_________________________
77 E3 3.0SI
77 E24 633CSi
78 E23 728i
79 E24 633CSi
80 E24 635CSi
82 E24 635csi Race Car Build (Schnitzer Replica) viewtopic.php?t=21792
82 E28 JPS (1 of 2 Ever Built)
85 E30 JPS
orval2
Posts: 96
Joined: Wed Mar 13, 2013 9:14 am
Location: Belgium - Liège

Re: Addam Smith JPS Group C Replica Build

Post by orval2 »

Woauw !

For the rear spoiler. A portuguese is building them.
http://www.jasacarbon.com/product/bmw-e ... ler-rear-2
User avatar
TBM
Posts: 342
Joined: Tue Apr 15, 2014 4:05 pm
Location: California
Contact:

Re: Addam Smith JPS Group C Replica Build

Post by TBM »

orval2 wrote: Mon Jun 24, 2019 8:17 am Woauw !

For the rear spoiler. A portuguese is building them.
http://www.jasacarbon.com/product/bmw-e ... ler-rear-2
I got a spoiler from him.. DO NOT buy. His spoiler took 4 times as long as he promised and it was tweaked. I did ask for a Carbon version to be made. I needed to have someone do a lot of work on it to get it to fit.
'84 M635csi
'86 Lotus esprit Turbo (sold)
Shipper 01
Posts: 791
Joined: Mon Nov 03, 2008 5:26 am
Location: Sydney Australia

Re: Addam Smith JPS Group C Replica Build

Post by Shipper 01 »

Gertie is waiting. With baited breath!
User avatar
TBM
Posts: 342
Joined: Tue Apr 15, 2014 4:05 pm
Location: California
Contact:

Re: Addam Smith JPS Group C Replica Build

Post by TBM »

Got one on order as well... I am impetuous!
'84 M635csi
'86 Lotus esprit Turbo (sold)
Shipper 01
Posts: 791
Joined: Mon Nov 03, 2008 5:26 am
Location: Sydney Australia

Re: Addam Smith JPS Group C Replica Build

Post by Shipper 01 »

This going around your M635CSi?
User avatar
TBM
Posts: 342
Joined: Tue Apr 15, 2014 4:05 pm
Location: California
Contact:

Re: Addam Smith JPS Group C Replica Build

Post by TBM »

Shipper 01 wrote: Tue Jun 25, 2019 1:06 am This going around your M635CSi?
Yes! Thanks for turning me on to him.
'84 M635csi
'86 Lotus esprit Turbo (sold)
orval2
Posts: 96
Joined: Wed Mar 13, 2013 9:14 am
Location: Belgium - Liège

Re: Addam Smith JPS Group C Replica Build

Post by orval2 »

TBM wrote: Mon Jun 24, 2019 2:01 pm
orval2 wrote: Mon Jun 24, 2019 8:17 am Woauw !

For the rear spoiler. A portuguese is building them.
http://www.jasacarbon.com/product/bmw-e ... ler-rear-2
I got a spoiler from him.. DO NOT buy. His spoiler took 4 times as long as he promised and it was tweaked. I did ask for a Carbon version to be made. I needed to have someone do a lot of work on it to get it to fit.
Good to know. Despite I'll keep my original spoiler.
Post Reply