82 633csi

Document your Sixer project here.

Moderators: GRNSHRK, ron, bfons

Post Reply
6finger
Posts: 11
Joined: Mon May 20, 2019 11:36 pm
Location: Las Vegas

82 633csi

Post by 6finger »

Howdy! Here's a bunch of pics of the turd I'm trying to polish!! 1982 e12 chassis 633csi 5 speed.. I'm looking for the following.. seat covers, LSD rear diff, suspension.. clear euro front corner lenses (directionals) would like to go aggressive bag, or coil over, (link below of a set I found.. a bit pricey though!), exhaust. thinking str8 piping it from the y back? motronic 1.0 to 1.3 will be spliced soon still figuring the pin out for the square BMW part# 61131359860 picture below. I believe it's referred to as c101 in later e28 chassis cars. likely will be wrapping it instead of paint once she's running, driving, sitting right.. This is the most pics etc I've ever done for my of my project turds!

https://yellowspeedracingusa.com/collec ... series-e12


Image11 by Tom Wolfinger, on Flickr

Image10 by Tom Wolfinger, on Flickr

Image9 by Tom Wolfinger, on Flickr

Image8 by Tom Wolfinger, on Flickr

Image7 by Tom Wolfinger, on Flickr

Image6 by Tom Wolfinger, on Flickr

Image1 by Tom Wolfinger, on Flickr

Image2 by Tom Wolfinger, on Flickr

Image3 by Tom Wolfinger, on Flickr

Image4 by Tom Wolfinger, on Flickr

Image5 by Tom Wolfinger, on Flickr

Imagee24 c101 2 by Tom Wolfinger, on Flickr

Imagee24 c101 1 by Tom Wolfinger, on Flickr

Imageswap6 by Tom Wolfinger, on Flickr

Imageswap5 by Tom Wolfinger, on Flickr

Imageswap3 by Tom Wolfinger, on Flickr

Image11 by Tom Wolfinger, on Flickr
Post Reply