Help Support Bigcoupe.com

January 2018 Catch up?

Pictures and talk about SharkFests in Australia with the E24 as the primary focus

Moderators: bfons, GRNSHRK, ron

Post Reply
Shipper 01
Bigcoupe supporter
Posts: 731
Joined: Mon Nov 03, 2008 5:26 am
Location: Sydney Australia

January 2018 Catch up?

Post by Shipper 01 » Tue Nov 28, 2017 10:38 pm

Hey guys,

Many months/years and no drives. Should we catch up in early 2018 for a brunch?

Let me know your thoughts.

I'm near the end of my massive engine build. Back together December but then need to await bench dyno. Awaiting one seal caught in customs. Pip Barker ordered under USD$1000 but when the parts landed the exchange rate had dropped and he was over the Customs threshold. So the joys of 10% GST and up to 30% tax. My one last seal is in that package.

Will be great to take a late Jan early Feb drive.

Hope you are all well.

Josh

635911
Posts: 55
Joined: Wed Jun 15, 2016 12:33 pm
Location: Sydney, Australia

Re: January 2018 Catch up?

Post by 635911 » Wed Nov 29, 2017 3:33 am

Hi Josh,

I'm keen. The Gosford Museum idea worth revisiting?

Toby
1986 635 CSi Lapis Blau with Anthrazit buffalo
1988 911 3.2 231HP Grand Prix white (Sold - 13 years of Zuffenhausen fun))
1984 BMW R80 G/S Dunkel Blau
1982 Yamaha SR500 scrambler

Shipper 01
Bigcoupe supporter
Posts: 731
Joined: Mon Nov 03, 2008 5:26 am
Location: Sydney Australia

Re: January 2018 Catch up?

Post by Shipper 01 » Thu Nov 30, 2017 10:30 pm

That would do nicely. I'm so close with my car. Feb drive would be do-able with a possible late Jan.

I'm just awaiting one seal caught in a Pelican Parts purchase held in customs. I'll put the kids seat in for my 4 year old and then it's time for a year of lovely drives.

I might also head to Bathurst and have a beer and steak with Trev. He has got to know some good roads around there.

GazM3
Bigcoupe supporter
Posts: 1636
Joined: Wed Oct 26, 2011 12:55 pm
Location: Melbourne, Australia

Re: January 2018 Catch up?

Post by GazM3 » Sat Dec 02, 2017 5:11 am

hey Josh.

its probably a safer bet to schedule a drive when your car is ready, as you dont want to put the mozz on yourself LOL.

When the car is ready ill personally come down to Syd from Melbourne to go on this long awaited 6 series tour.
1974 2002 M10, dogleg 2307cc
1984 E24 M635csi M88/3 dogleg
1987 E23 735i M30 auto
1994 E34 540i M60 6spd supercharged
1997 E36 M3 S50B32 supercharged (U/C)

User avatar
MrE
Senior Member
Posts: 1772
Joined: Fri Aug 04, 2006 10:37 pm
Location: Capital City, Australia

Re: January 2018 Catch up?

Post by MrE » Sat Dec 02, 2017 5:23 am

Hi Josh

Bathurst would be nice or maybe Mittagong and some of the surrounding roads. Has your beast got a/c?
Image

User avatar
sansouci
Bigcoupe supporter
Posts: 1490
Joined: Mon Jul 08, 2013 10:52 pm
Location: New York City

Re: January 2018 Catch up?

Post by sansouci » Sat Dec 02, 2017 2:40 pm

Shipper 01 wrote:
Thu Nov 30, 2017 10:30 pm


I'm just awaiting one seal caught in a Pelican Parts purchase held in customs.
How much do they clip you to get a small part through customs?
Sansouci
84 E24 633Csi Auto, Bronzit/PearlBeige 6997510
93 E32 740il M60 Auto, Alpenweis/Ultramarine
60 535i M30 5-speed Green/Beige (crushed)
71 240Z 4-speed White/Blue (rusty & sold)
65 396 Chevelle 4-speed, Marina Blue/Black (stolen)

Shipper 01
Bigcoupe supporter
Posts: 731
Joined: Mon Nov 03, 2008 5:26 am
Location: Sydney Australia

Re: January 2018 Catch up?

Post by Shipper 01 » Sun Dec 03, 2017 1:50 am

Mr E the beast does not have a/c. This is on the list.

Any parts with a combined value inclusive of postage over $1k are hit with GST and an import duty of 20% to 30%.

User avatar
AndrewHolt
Posts: 33
Joined: Sun Dec 16, 2012 9:58 am
Location: Sydney

Re: January 2018 Catch up?

Post by AndrewHolt » Sun Dec 03, 2017 9:59 am

Hi - a drive early in 2018 would be great. Haven't been on a decent drive in ages.
Andrew

1986 635CSi

635911
Posts: 55
Joined: Wed Jun 15, 2016 12:33 pm
Location: Sydney, Australia

Re: January 2018 Catch up?

Post by 635911 » Wed Jan 10, 2018 4:14 am

Hi Guys,

Christmas - Tick
New Years - Tick
Back to work - Tick

When can we have a drive?

Toby
1986 635 CSi Lapis Blau with Anthrazit buffalo
1988 911 3.2 231HP Grand Prix white (Sold - 13 years of Zuffenhausen fun))
1984 BMW R80 G/S Dunkel Blau
1982 Yamaha SR500 scrambler

User avatar
MrE
Senior Member
Posts: 1772
Joined: Fri Aug 04, 2006 10:37 pm
Location: Capital City, Australia

Re: January 2018 Catch up?

Post by MrE » Wed Jan 10, 2018 7:41 pm

Hi everyone,

Well, if you're able to meet me halfway, how about next Saturday, 20 January - meet in Mittagong NSW for breakfast and then head down through the Southern Highlands & Kangaroo Valley towards Nowra.

From there head back up the coast northwards via Jamberoo Mountain Road, up through the mountains towards Robertson and then towards whichever is your closest freeway home.

The total route is around 170kms. I'm open to suggestions on variations to the route, if there's anywhere in particular around that way you'd like to take a look at, or even whether we should do it clockwise or anti-clockwise.

Here's a Google map as an idea: Google Map Route - Southern Highlands

If there's interest I'll suss somewhere in Mittagong for a breakfast meet point. Let me know!?

-Ellis
Image

635911
Posts: 55
Joined: Wed Jun 15, 2016 12:33 pm
Location: Sydney, Australia

Re: January 2018 Catch up?

Post by 635911 » Wed Jan 10, 2018 10:08 pm

Hi Ellis,

Subject to Commander-in-Chief approval, i'm in.

Toby
1986 635 CSi Lapis Blau with Anthrazit buffalo
1988 911 3.2 231HP Grand Prix white (Sold - 13 years of Zuffenhausen fun))
1984 BMW R80 G/S Dunkel Blau
1982 Yamaha SR500 scrambler

Shipper 01
Bigcoupe supporter
Posts: 731
Joined: Mon Nov 03, 2008 5:26 am
Location: Sydney Australia

Re: January 2018 Catch up?

Post by Shipper 01 » Thu Jan 11, 2018 3:24 am

I'll chat to Rosie and should be in, minus the car. The engine should be ready late Jan as the engine builder in Sydney now has all the parts. Pip Barker is also bringing up my Group C race engine for the E3 Jan 30 and that should drop straight in post a bench top dyno tune post the 633's engine being dyno'd on the same bench dyno.

I bought Rosie a new BMW so we can take that. Isaac is growing up, quick. 4 going on 10.

Josh

User avatar
MrE
Senior Member
Posts: 1772
Joined: Fri Aug 04, 2006 10:37 pm
Location: Capital City, Australia

Re: January 2018 Catch up?

Post by MrE » Sun Jan 14, 2018 1:43 am

Sounds good everyone.

Toby - looking forward to meeting you, and it's always good to get a chance to check out another Sixer too.

Josh - bring whichever car you like buddy, it'll be excitement & adventure as alway; Rosie, a delight & a pleasure as always; and Isaac, sounds like he's a chip off the old Shipper block.

I've picked a breakfast meet point in the centre of Mittagong, a cafe called The Shaggy Cow. Odd name, but everything about the place appears excellent. Location is 112 Main Street, Mittagong - the website says there's a public carpark behind the cafe, though in the past we've been able to get on-street parking just a bit further down along Main St/Bowral Rd, near the Playhouse.
http://www.theshaggycow.com.au/

I've changed the route slightly from what I originally proposed to avoid going all the way south to Nowra.

The plan is to meet at Mittagong at 8:30-9am and have breakfast with a view to leaving at around 10am, head to Kangaroo Valley, on through to Berry, lunch if we're ready at Gerringong or Kiama, then up via Jamberoo Mountain Road to Robertson. From there we can each take whichever way home is best.

Here is the route: Southern Highlands 20 Jan

I really like the Southern Highlands area, but haven't done it for a long time, so we'll just take it easy and find our way down and back. If there's anything I've forgotten, I'm all ears.

Let's keep in touch during the week to have an idea of numbers, people attending etc.

Cool. I'm looking forward to it.

-Ellis.
Image

Shipper 01
Bigcoupe supporter
Posts: 731
Joined: Mon Nov 03, 2008 5:26 am
Location: Sydney Australia

Re: January 2018 Catch up?

Post by Shipper 01 » Sun Jan 14, 2018 7:59 am

Cannot promise Rosie and/or Isaac. Bought Rosie an X5 diesel and she is concerned I'll race it, hehehehe. May need to be the Renault. My 6'er and the racer are 3 weeks from engine dyno. Then a few weeks to get the engines back in. What a wait. Years!!

635911
Posts: 55
Joined: Wed Jun 15, 2016 12:33 pm
Location: Sydney, Australia

Re: January 2018 Catch up?

Post by 635911 » Sun Jan 14, 2018 11:02 pm

Ellis & Josh,

Bad news for me, It turns out I am already committed this weekend.

Very sorry. I am very keen to meet up when the opportunity next presents.

Toby
1986 635 CSi Lapis Blau with Anthrazit buffalo
1988 911 3.2 231HP Grand Prix white (Sold - 13 years of Zuffenhausen fun))
1984 BMW R80 G/S Dunkel Blau
1982 Yamaha SR500 scrambler

Mamod17
Posts: 36
Joined: Sun Aug 30, 2015 8:41 am
Location: Sydney

Re: January 2018 Catch up?

Post by Mamod17 » Mon Jan 15, 2018 9:36 am

I'm keen if the drive is still on!

Denis
1986 635csi 5speed Alpine White M-Tech Aust Del
2001 325ci Auto Orient Blue

Previous
1988 635csi Auto Zinnerbot
1988 320i Convertible

Shipper 01
Bigcoupe supporter
Posts: 731
Joined: Mon Nov 03, 2008 5:26 am
Location: Sydney Australia

Re: January 2018 Catch up?

Post by Shipper 01 » Mon Jan 15, 2018 10:36 pm

Still available Ellis if you are a go.

If just you, Denis and myself we are caught with just 2 6'ers. Should we delay to later in Feb when my 6'er is back on the road?

Let me know.

Josh

Shipper 01
Bigcoupe supporter
Posts: 731
Joined: Mon Nov 03, 2008 5:26 am
Location: Sydney Australia

Re: January 2018 Catch up?

Post by Shipper 01 » Thu Jan 18, 2018 1:49 am

Guys,

I've now got to work Saturday this week. I've got a client going on holidays Sunday and need to get the work done. I need to meet him on the central coast.

Either enjoy the drive with me grumbling at not being there or feel free to delay to late Feb. My engine builder has promised 1st week of Feb.

I sms'd Ellis re not enough 6'ers in the drive earlier today and whether or not we delay. I'm now caught as well. Let me know your thoughts.

Josh

Mamod17
Posts: 36
Joined: Sun Aug 30, 2015 8:41 am
Location: Sydney

Re: January 2018 Catch up?

Post by Mamod17 » Thu Jan 18, 2018 10:27 am

I’m good to delay. I can post on Aussie Sharks on facebook to round up some numbers for next month if you’re ok with that...
1986 635csi 5speed Alpine White M-Tech Aust Del
2001 325ci Auto Orient Blue

Previous
1988 635csi Auto Zinnerbot
1988 320i Convertible

User avatar
MrE
Senior Member
Posts: 1772
Joined: Fri Aug 04, 2006 10:37 pm
Location: Capital City, Australia

Re: January 2018 Catch up?

Post by MrE » Thu Jan 18, 2018 11:03 am

No problem, we'll give it a miss this weekend. It's forecast to be around 35 degrees on Saturday, so perhaps better off avoiding the heat rather than out dicing in it. Maybe try late Feb instead. Sure Denis, if there are facebook 6ers they're welcome. Do they organise drives or anything of their own?
Image

Mamod17
Posts: 36
Joined: Sun Aug 30, 2015 8:41 am
Location: Sydney

Re: January 2018 Catch up?

Post by Mamod17 » Thu Jan 18, 2018 10:49 pm

We haven't yet but there is demand for it.

Agree that the heat would be an issue - mine doesn't like anything over 30 degrees!
1986 635csi 5speed Alpine White M-Tech Aust Del
2001 325ci Auto Orient Blue

Previous
1988 635csi Auto Zinnerbot
1988 320i Convertible

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests