USATCO Break Loose Tool
USATCO Break Loose Tool
Based on another member's suggestion, I bought a new Break Loose Tool from US Air Tool Company (USATCO) for about $US44. P/N was 53.541AK. I got the kit directly from USATCO with the adapter and some bits (flat blade, philips). And I also picked up an air chisel from HF to power it. Just not sure that my small pancake compressor has enough oomph. Bit I'll add a picture and a follow up on how it works on my oil pan and trans cover bolts.
- Attachments
-
- Just Needed a Laugh
- BuyByBuy.jpg (76.74 KiB) Viewed 2216 times
-
- Break Loose Tool
- Tool 2.jpg (47.48 KiB) Viewed 2216 times
Last edited by sansouci on Thu Feb 11, 2016 1:38 am, edited 1 time in total.
Sansouci
84 E24 633Csi Auto, Bronzit/PearlBeige 6997510
93 E32 740il M60 Auto, Alpenweis/Ultramarine
60 528i M30 5-speed Green/Beige (crushed)
71 240Z 4-speed White/Blue (rusty & sold)
65 396 Chevelle 4-speed, Marina Blue/Black (stolen)
84 E24 633Csi Auto, Bronzit/PearlBeige 6997510
93 E32 740il M60 Auto, Alpenweis/Ultramarine
60 528i M30 5-speed Green/Beige (crushed)
71 240Z 4-speed White/Blue (rusty & sold)
65 396 Chevelle 4-speed, Marina Blue/Black (stolen)
Re: USATCO Break Loose Tool
nice!
Re the compressor, if the CFM isn't high enough to run the air tool all the time it all depends on the size of the receiver on it as to whether you will get to use it for long enough or not. I guess it is a suck it and see job.
cheers
Re the compressor, if the CFM isn't high enough to run the air tool all the time it all depends on the size of the receiver on it as to whether you will get to use it for long enough or not. I guess it is a suck it and see job.
cheers
~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~