Dipstick restoration . . .
Dipstick restoration . . .
To start, let's say this thread is for the truly anal-retentive shark owner. The small details count, and the dipstick was pulling down the visual impact of my car's engine bay, so something had to be done.
My car's 32-year old dipstick had chipped and peeling paint on both the metal and rubber parts. I didn't think any sort of paint would stick very well to the less-than-perfect surfaces, so I thought I'd try some of this Plastidip:
The problem with this product, as supplied, is it's far too thick for a small part like the dipstick. If you dip the part and pull it out, the result will be large drips and runs, and even a skin in the loop of the handle. Good thing this stuff wipes off easily while wet, or peels off in a sheet when dry. I had some mineral spirits, which worked well as a thinner, so I added some to the container, to give a viscosity like heavy cream. The thinner rubber leaves an even layer, without large drips or runs, but it's too thin to be durable, so I applied three coats spaced about an hour apart. The pic below is actually my third attempt, and this one looks about perfect.
As I said, not for everyone, but I was bored and had an extra $8
My car's 32-year old dipstick had chipped and peeling paint on both the metal and rubber parts. I didn't think any sort of paint would stick very well to the less-than-perfect surfaces, so I thought I'd try some of this Plastidip:
The problem with this product, as supplied, is it's far too thick for a small part like the dipstick. If you dip the part and pull it out, the result will be large drips and runs, and even a skin in the loop of the handle. Good thing this stuff wipes off easily while wet, or peels off in a sheet when dry. I had some mineral spirits, which worked well as a thinner, so I added some to the container, to give a viscosity like heavy cream. The thinner rubber leaves an even layer, without large drips or runs, but it's too thin to be durable, so I applied three coats spaced about an hour apart. The pic below is actually my third attempt, and this one looks about perfect.
As I said, not for everyone, but I was bored and had an extra $8
Dean
Lutz, FL
'85 635 CSi Euro #9402254
'87 Spider Veloce
'92 Spider Veloce
'08 350Z
Lutz, FL
'85 635 CSi Euro #9402254
'87 Spider Veloce
'92 Spider Veloce
'08 350Z
Re: Dipstick restoration . . .
Awesome work
2001 Alpina B10 V8 Touring (1 of 12 rhd)
1997 Alpina B12 5.7 L (1 of 2 rhd)
1995 Alpina B10 4.6 Touring (1 of 1 rhd)
1985 BMW M635CSi (1 of 524 rhd)
1982 BMW 635CSiA (1 of 100's left from the 1000's made and still valiantly fighting against a rusty grave)
1997 Alpina B12 5.7 L (1 of 2 rhd)
1995 Alpina B10 4.6 Touring (1 of 1 rhd)
1985 BMW M635CSi (1 of 524 rhd)
1982 BMW 635CSiA (1 of 100's left from the 1000's made and still valiantly fighting against a rusty grave)
Re: Dipstick restoration . . .
Great idea!
I think I need to go buy a yellow spraycan of plastidip.
Jose
I think I need to go buy a yellow spraycan of plastidip.
Jose
1987 M6 - My dream car
Re: Dipstick restoration . . .
I've never tried the spray can type, I wonder if it has the same durability? The bad thing about the liquid is that they make the can so it really can't be resealed enough to prevent the product from drying out (it's like a tennis ball can). Luckily, we had a tall 16 oz jar of Trader Joe's stuffed olives that was almost empty, so it's now the "dipping" jar. I have enough for maybe 20 more dipsticks, if anyone wants theirs done. I probably won't have any other use for it.
Dean
Lutz, FL
'85 635 CSi Euro #9402254
'87 Spider Veloce
'92 Spider Veloce
'08 350Z
Lutz, FL
'85 635 CSi Euro #9402254
'87 Spider Veloce
'92 Spider Veloce
'08 350Z
-
- Platinum Member
- Posts: 4493
- Joined: Tue Mar 16, 2010 8:32 pm
- Location: usually in the barn, Kent, England.
Re: Dipstick restoration . . .
Very effective
Re: Dipstick restoration . . .
It's tough stuff, so it should last a very long time. I screwed up my second attempt and left a big drip near the bottom, and it's a task to cut it off. I had to make several lengthwise slits with a razor blade, and then peel it like a banana.
Dean
Lutz, FL
'85 635 CSi Euro #9402254
'87 Spider Veloce
'92 Spider Veloce
'08 350Z
Lutz, FL
'85 635 CSi Euro #9402254
'87 Spider Veloce
'92 Spider Veloce
'08 350Z
Re: Dipstick restoration . . .
Hey that's very cool Dean! I keep forgetting about that stuff, I even have a couple cans around that I haven't even opened!
'87 635csi, 5sp man, dk blu on pearl beige
'88 635csi, auto, black on grey
'63 BMW Isetta
'75 XJ6C, 2dr, warm 350
'86 XJ6, th700r4
'75TR6
'64 Olds 88 conv
"68 T120 Bonneville
'88 635csi, auto, black on grey
'63 BMW Isetta
'75 XJ6C, 2dr, warm 350
'86 XJ6, th700r4
'75TR6
'64 Olds 88 conv
"68 T120 Bonneville
Re: Dipstick restoration . . .
nice work! Almost looks 'untouched by human hand!'...
Re resealing the container; IME you can greatly increase the shelf life of all kinds of paints etc by binding insulation tape tightly around the cap, to act as a secondary seal. The same thing also works with loads of other stuff like seldom-used magic marker pens, touch-up paints etc too.
cheers
Re resealing the container; IME you can greatly increase the shelf life of all kinds of paints etc by binding insulation tape tightly around the cap, to act as a secondary seal. The same thing also works with loads of other stuff like seldom-used magic marker pens, touch-up paints etc too.
cheers
~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Re: Dipstick restoration . . .
Agreed - it looks fantastic.Brucey wrote:nice work! Almost looks 'untouched by human hand!'...
Brilliant!!Brucey wrote:IME you can greatly increase the shelf life of all kinds of paints etc by binding insulation tape tightly around the cap, to act as a secondary seal. The same thing also works with loads of other stuff like seldom-used magic marker pens, touch-up paints etc too.
- zinnocoupe
- Posts: 506
- Joined: Fri Sep 19, 2014 12:57 am
- Location: Vancouver BC
Re: Dipstick restoration . . .
Looks great Dean, its little things like this that make the engine bay look really fresh and new. Nice work. I was going to do this with yellow paint. I'll have to watch for some of that stuff.