Well, the m635 has been sitting for a number of years and I'm ready to get back on this project. I borrowed an scope from a friend and looked inside what was (in 2004) a new gas tank and was greeted with quite an ugly scene. No leaks but quite a bit of rust and what appears to be sediment.
Any tips other than a new tank? I looked and they appear to be about double what I paid for one in '04. The 84Euro 635 tank "just" had what appeared to be sediment on the bottom whereas the M635 tank bottom, sides and neck looked scary.
Billy
RESTORING A SITTING GAS TANK?
- hornhospital
- Platinum Member
- Posts: 2931
- Joined: Sun Jul 11, 2010 6:46 pm
- Location: Silverhill, AL
- Contact:
Re: RESTORING A SITTING GAS TANK?
You can have the tank cleaned ("boiled out" is the common term) and then coated internally to prevent further corrosion. I had one done for an E30 project. It was about $100 for the work.
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
Re: RESTORING A SITTING GAS TANK?
Thanks Ken.hornhospital wrote: ↑Fri Nov 03, 2017 10:32 pm You can have the tank cleaned ("boiled out" is the common term) and then coated internally to prevent further corrosion. I had one done for an E30 project. It was about $100 for the work.
I'm hoping I can find this "locally"; however, I may be resource poor here in central Mississippi.
Billy
-
- Bigcoupe Contributor
- Posts: 323
- Joined: Wed Sep 10, 2014 12:08 am
- Location: Arden, NC 28704
Re: RESTORING A SITTING GAS TANK?
I've found that some radiator shops offer fuel tank services as well. Roger
89 635CSiA (11/88 build)
AlpineWeiss II (218)/Natur(0200)
87 L6 635CSI Sold
87 MB 560SL Sold
AlpineWeiss II (218)/Natur(0200)
87 L6 635CSI Sold
87 MB 560SL Sold
Re: RESTORING A SITTING GAS TANK?
Thanks for the info Roger. I'll check around here and see.rhanley 635csi89 wrote: ↑Sat Nov 04, 2017 5:26 pm I've found that some radiator shops offer fuel tank services as well. Roger
Billy
- hornhospital
- Platinum Member
- Posts: 2931
- Joined: Sun Jul 11, 2010 6:46 pm
- Location: Silverhill, AL
- Contact:
Re: RESTORING A SITTING GAS TANK?
I had it done in Mobile. I can get the particulars if you want. It was a radiator shop, as mentioned.
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
Re: RESTORING A SITTING GAS TANK?
Ken-hornhospital wrote: ↑Sun Nov 05, 2017 6:08 am I had it done in Mobile. I can get the particulars if you want. It was a radiator shop, as mentioned.
I would appreciate any information that you can get.
Billy
- hornhospital
- Platinum Member
- Posts: 2931
- Joined: Sun Jul 11, 2010 6:46 pm
- Location: Silverhill, AL
- Contact:
Re: RESTORING A SITTING GAS TANK?
Here you go, Billy:
Rainwater Radiator
2657 Old Shell Road
Mobile, Al 36602
251-476-1530.
Rainwater Radiator
2657 Old Shell Road
Mobile, Al 36602
251-476-1530.
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
Re: RESTORING A SITTING GAS TANK?
hornhospital wrote: ↑Mon Nov 06, 2017 3:17 pm Here you go, Billy:
Rainwater Radiator
2657 Old Shell Road
Mobile, Al 36602
251-476-1530.
Thanks Ken!