Help Support Bigcoupe.com

BBS RC090 finish selection opinion

Post in this forum for topics relating to tires and wheels

Moderators: ron, bfons, GRNSHRK

Post Reply
rhanley 635csi89
Bigcoupe Contributor
Posts: 272
Joined: Wed Sep 10, 2014 12:08 am
Location: Arden, NC 28704
Contact:

BBS RC090 finish selection opinion

Post by rhanley 635csi89 » Sat Jan 23, 2021 2:47 pm

Hi All,
We're wrapping up the respray of my 89 635CSiA, see photo.  The car, Alpine Weiss II with Havana Brown Buffalo leather comfort seats, complete with rear headrests.  Wheels are 2 piece 17" BBS RC090.  Tires Front 225/45R17.  Rear 255/40R17. The wheels are being refinished by Paul Ehrlich.  The plastic faces/caps and hubs will be replaced with an aluminium replacement which allows powder coating of the webs, faces & caps resulting in a uniform color on these components. The lips/hubs will be polished aluminium with a clear ceramic coating.  
I am asking for your opinion on the finished color combination. (1) BBS gold on webs and faces/caps or (2) silver on the webs and faces/caps..  Lips and hubs will be polished aluminium with clear ceramic coating.

The attached photos are a representation of the various combinations.  Your candid comments will be appreciated.  The dirty wheel is from my car.

I'm considering leaving the rear license plate area "white" in lieu of usual "black" in the USA. See photo, what do you think?.

Thank you in advance.
Roger


https://www.icloud.com/sharedalbum/#B0s5qXGF1HTH4Xj
89 635CSiA (11/88 build)
AlpineWeiss II (218)/Natur(0200)
87 L6 635CSI Sold
87 MB 560SL

User avatar
635sharknose
Bigcoupe 100 Post club
Posts: 208
Joined: Fri Sep 13, 2019 4:58 pm
Location: The Netherlands
Contact:

Re: BBS RC090 finish selection opinion

Post by 635sharknose » Sat Jan 23, 2021 4:38 pm

I would go for the all silver finish of the wheels, looks fantastic.

And the area around the license plate looks better in black in my opinion, but that is a matter of taste.
Last edited by 635sharknose on Tue Feb 16, 2021 5:44 pm, edited 1 time in total.
Instagram: @635sharknose
1987 635CSi Bronzitbeige

GRNSHRK
Platinum Member
Platinum Member
Posts: 3007
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

Re: BBS RC090 finish selection opinion

Post by GRNSHRK » Sat Jan 23, 2021 8:24 pm

Plus one on the silver with polished lips =D>

As far as leaving that back panel white as opposed to the traditional black, think I would need to see it with the lights and bumper installed, plate on as well, before making that decision :-k

Man Roger, looking sweet \:D/
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image

User avatar
Da_Hose
Platinum Member
Platinum Member
Posts: 3214
Joined: Fri Mar 07, 2008 8:15 am
Location: Napa, Ca.

Re: BBS RC090 finish selection opinion

Post by Da_Hose » Sat Jan 23, 2021 9:29 pm

I am a fan of a slightly darker grey center with the polished lips. Definitely grey, and not gold though.

I think all white would look very clean. Black would really stand out, and I think matching white would look better, even with the spoiler.

Jose
1987 M6 - My dream car

User avatar
635sharknose
Bigcoupe 100 Post club
Posts: 208
Joined: Fri Sep 13, 2019 4:58 pm
Location: The Netherlands
Contact:

Re: BBS RC090 finish selection opinion

Post by 635sharknose » Sun Jan 24, 2021 9:12 am

This is how all white looks like on a late model E24.
https://oldcolonelcars.co.uk/occ/wp-con ... 80x933.jpg
Instagram: @635sharknose
1987 635CSi Bronzitbeige

User avatar
86_6series
Platinum Member
Platinum Member
Posts: 727
Joined: Mon Apr 02, 2007 10:08 pm
Location: West Nyack, NY

Re: BBS RC090 finish selection opinion

Post by 86_6series » Mon Jan 25, 2021 12:52 pm

Silver/black

brickwhite
Bigcoupe 100 Post club
Posts: 768
Joined: Wed Sep 01, 2010 3:29 pm
Location: Springfield, MO USA

Re: BBS RC090 finish selection opinion

Post by brickwhite » Mon Jan 25, 2021 2:46 pm

silver
- 12 535i
- 92 325ic
- 85 M635csi

User avatar
Soperman
Bigcoupe 100 Post club
Posts: 433
Joined: Tue Nov 25, 2014 2:44 pm
Location: London, UK

Re: BBS RC090 finish selection opinion

Post by Soperman » Mon Jan 25, 2021 3:39 pm

Silver
E24 M635CSi

brickwhite
Bigcoupe 100 Post club
Posts: 768
Joined: Wed Sep 01, 2010 3:29 pm
Location: Springfield, MO USA

Re: BBS RC090 finish selection opinion

Post by brickwhite » Mon Jan 25, 2021 5:33 pm

where can one get those metal caps for rc090?

found them...

https://www.ebay.com/itm/BBS-RC-090-062 ... 3777468143
- 12 535i
- 92 325ic
- 85 M635csi

rhanley 635csi89
Bigcoupe Contributor
Posts: 272
Joined: Wed Sep 10, 2014 12:08 am
Location: Arden, NC 28704
Contact:

Re: BBS RC090 finish selection opinion

Post by rhanley 635csi89 » Tue Jan 26, 2021 2:27 am

Thank you all for your input,This group is so helpful and great to work with.

I'm going silver.

Brickwhite, I had purchased these SS caps for my car. Now that I have a better understanding of the finishes available for the BBS RC090 wheels, I'm not going to use these. I'm going with the a powder coated silver finish on the webs/face and re-placing the plastic with extruded aluminium.
The hubs shown in the photo below are stainless steel and off of a Lincoln Town Car. The hubs fit over the BMW hubs perfectly, they're about a 1/8 taller than the BMW. If any one has interest in these let me know.
D5DB0B5B-142E-4DC4-B5ED-46AE9FD1294F_1_201_a.jpeg
D5DB0B5B-142E-4DC4-B5ED-46AE9FD1294F_1_201_a.jpeg (342.33 KiB) Viewed 691 times
Added contact info.

Look on FB or IG for: "ewheelworks" Paul sells all of the components for wheels
89 635CSiA (11/88 build)
AlpineWeiss II (218)/Natur(0200)
87 L6 635CSI Sold
87 MB 560SL

LarryM
Bigcoupe 100 Post club
Posts: 112
Joined: Sat Jul 13, 2013 3:19 am
Location: Camarillo, CA

Re: BBS RC090 finish selection opinion

Post by LarryM » Sat Jan 30, 2021 8:19 am

IMO you made the right choice with the silver.
A few years ago I restored a set of BBS RS061s for my Zinno E28 and had them done in BBS Gold; they looked terrific but later I regretted my decision because they had too much of an "aftermarket" look on the car. Silver has a cleaner, "factory" look which becomes more appealing as these cars age and become classics.

I'd keep the rear white, especially if your state has plates with nicely contrasting colors. And even if it doesn't.
1985 635CSi
1987 535is
1965 Impala SS

rhanley 635csi89
Bigcoupe Contributor
Posts: 272
Joined: Wed Sep 10, 2014 12:08 am
Location: Arden, NC 28704
Contact:

Re: BBS RC090 finish selection opinion

Post by rhanley 635csi89 » Tue Feb 16, 2021 2:07 pm

Thanks to everyone for their input. This photo represents the final product for my 1989 635 CSI, Alpine Weiss II.

What do you think? At times I think it's just to much bling.

I'm still on the fence regarding the following and would appreciate your comments.
BBS logos per photo or BMW logos?
Valve stems standard (typical) or BBS stainless $70. for four.

Thanks, Roger


BBS Face color ssampl3 (3).jpg
BBS Face color ssampl3 (3).jpg (322.4 KiB) Viewed 421 times
89 635CSiA (11/88 build)
AlpineWeiss II (218)/Natur(0200)
87 L6 635CSI Sold
87 MB 560SL

Sbeaud
Posts: 77
Joined: Fri Jan 04, 2019 9:38 pm
Location: Rochester Hills, Michigan, USA

Re: BBS RC090 finish selection opinion

Post by Sbeaud » Tue Feb 16, 2021 6:14 pm

That looks fantastic! =D>

I think at least some bling really sets the car off (do not cover the car with a reflective wrap!)

For that reason I think the stainless stems would be very nice. I like the roundel, so I vote for the BMW logos.

Again, very nice!

Scott
1988 M6

GRNSHRK
Platinum Member
Platinum Member
Posts: 3007
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

Re: BBS RC090 finish selection opinion

Post by GRNSHRK » Wed Feb 17, 2021 8:28 pm

Gud Gawd :shock:

Wow, now that's some polish job =D>

Think I would opt for Roundels as well, or maybe even the old school Motorsport Roundels, which I was lucky enough to find, a few years ago :-"

See my post regarding my Throwing Star wheel redo for pix \:D/
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image

emac
Posts: 99
Joined: Thu Feb 06, 2020 2:57 am
Location: SC

Re: BBS RC090 finish selection opinion

Post by emac » Thu Feb 18, 2021 1:18 am

That kind of bling is just what the 80's were all about! I remember a guy in town had a red m6 with polished BBS wheels back in the 80's. It was badass.

Great work!

Tommys 89 635
Bigcoupe 100 Post club
Posts: 446
Joined: Mon Oct 30, 2006 8:23 pm
Location: San Mateo, CA just South of San Francisco

Re: BBS RC090 finish selection opinion

Post by Tommys 89 635 » Thu Feb 18, 2021 9:44 pm

Wow, those are pretty. Either BBS or BMW roundel would look great. Paul did a great job, what was the turn around time and the final dimensions on your wheels? Thanks
Tommy
1989 635 CSI (Second owner since Jun 1995, driven daily and retired in 2013 with 292k to occasional driving)
2011 335D (Daily driver)

rhanley 635csi89
Bigcoupe Contributor
Posts: 272
Joined: Wed Sep 10, 2014 12:08 am
Location: Arden, NC 28704
Contact:

Re: BBS RC090 finish selection opinion

Post by rhanley 635csi89 » Fri Feb 19, 2021 2:54 pm

Thank you everyone for your input.

Going with BMW roundels, BBS valve stems and silver as shown in the photo.

The wheel in the photo is not of my wheel, however, mine will look like that with a BMW roundel. I'm a visual individual and find it much simpler to state "that's what I want" once I see it.

Paul has been easy to work with and intents to turn everything around in two weeks.
He had one of his employees pick up my wheels in Wake Forest NC., he's outside of Charlotte NC., he'll have them delivered as well, $100 charge.
Paul will also be removing the anodize from the front and rear bumpers and the rear and front windshields trim pieces.  They will be polished and a clear ceramic coating will be applied.

My 17 inch wheels are 2 piece RC090 non staggered.  Info on hub 80x17H2  IS20 ?. I'm not sure what that means in laymen terms. I've attached a photo of my wheel. Hubs and caps need to be clean up for the new wheels. :wink:
Roger
BMW HUB.jpeg
BMW HUB.jpeg (274 KiB) Viewed 312 times
89 635CSiA (11/88 build)
AlpineWeiss II (218)/Natur(0200)
87 L6 635CSI Sold
87 MB 560SL

User avatar
hornhospital
Platinum Member
Platinum Member
Posts: 2634
Joined: Sun Jul 11, 2010 6:46 pm
Location: Silverhill, AL
Contact:

Re: BBS RC090 finish selection opinion

Post by hornhospital » Fri Feb 19, 2021 7:22 pm

The 17 is obvious, the rim size. The "is" ( usually is "et") is the offset. The 80 may be 8" width, but that's a guess.
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann";'87 325is "Odette"; '93 325is "Elvira"; '95 M3 "Ashlyn"; '95 318is "Bebe"

bpoliakoff
Platinum Member
Platinum Member
Posts: 3041
Joined: Thu Sep 28, 2006 9:28 pm
Location: scottsdale, arizona
Contact:

Re: BBS RC090 finish selection opinion

Post by bpoliakoff » Fri Feb 19, 2021 10:05 pm

IS is off set
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.

User avatar
hornhospital
Platinum Member
Platinum Member
Posts: 2634
Joined: Sun Jul 11, 2010 6:46 pm
Location: Silverhill, AL
Contact:

Re: BBS RC090 finish selection opinion

Post by hornhospital » Sat Feb 20, 2021 1:16 am

Thats what I said. Sometimes (usually) it's listed as "et", which is a contraction of the German "einpresstiefe", which means pressed-in depth. Some wheel manufacturers, like BBS, list it as "is". It all means offset.
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann";'87 325is "Odette"; '93 325is "Elvira"; '95 M3 "Ashlyn"; '95 318is "Bebe"

bpoliakoff
Platinum Member
Platinum Member
Posts: 3041
Joined: Thu Sep 28, 2006 9:28 pm
Location: scottsdale, arizona
Contact:

Re: BBS RC090 finish selection opinion

Post by bpoliakoff » Sat Feb 20, 2021 2:32 am

^++1
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.

Jlc
Posts: 94
Joined: Sun Sep 27, 2020 5:27 pm
Location: Atl

Re: BBS RC090 finish selection opinion

Post by Jlc » Sat Feb 20, 2021 8:46 pm

hornhospital wrote:
Sat Feb 20, 2021 1:16 am
Thats what I said. Sometimes (usually) it's listed as "et", which is a contraction of the German "einpresstiefe", which means pressed-in depth. Some wheel manufacturers, like BBS, list it as "is". It all means offset.
Gotta love the Germans; rather than create a new word just sring several together.
85 635CSi Bronzit

Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests