Need shorter outer lip for HRE 504/Hayashi Techno R 16"
Posted: Fri May 04, 2018 1:00 pm
I have an 88 BMW M6 with HRE 504/Hayashi Techno R 16" mounted. Like the wheels, but the front wheels sit a little too proud of the wheel arches for my taste. I don't want new wheels, but want to have these refinished (the car is at the end of a 3 year rehab). The only things that can be done are
1. Find a shorter outer lip? Its a standard 20 hole 16" lip (I think that seems pretty standard). I've looked around on the web and can find quite a few places selling lips, but I really dont have a clue whats what, so could use a few pointers to experienced wheel shops.
2. Cut/weld/polish my existing lips an inch or so narrower (I already sent pics to Weldcraft to see if they can help).
Any other tips ideas?
1. Find a shorter outer lip? Its a standard 20 hole 16" lip (I think that seems pretty standard). I've looked around on the web and can find quite a few places selling lips, but I really dont have a clue whats what, so could use a few pointers to experienced wheel shops.
2. Cut/weld/polish my existing lips an inch or so narrower (I already sent pics to Weldcraft to see if they can help).
Any other tips ideas?