Anyone running 18X9 up FRONT? Feedback/Suggestions?
Moderators: GRNSHRK, ron, bfons
- SORIANOTRON
- Posts: 71
- Joined: Tue Oct 31, 2017 7:58 pm
- Location: Honolulu
Anyone running 18X9 up FRONT? Feedback/Suggestions?
Looking to run 18x9 on all 4 corners, anyone with a similar set up can provide me some insight?
Re: Anyone running 18X9 up FRONT? Feedback/Suggestions?
It sure if this helps but I have 18x9 rears and 18x8 fronts (for sale in the classifieds). They seemed to be fine. I can’t speak to the next size up front though.
- hornhospital
- Platinum Member
- Posts: 2940
- Joined: Sun Jul 11, 2010 6:46 pm
- Location: Silverhill, AL
- Contact:
Re: Anyone running 18X9 up FRONT? Feedback/Suggestions?
18x9 with a 20 offset might fit, but it's going to be very close. I have 18x8.5s with 25 offset on the front and they fit (235/40) without rubbing, but it's VERY close to the strut.
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
-
- Posts: 247
- Joined: Mon Aug 01, 2011 2:18 pm
- Location: Hampshire UK
Re: Anyone running 18X9 up FRONT? Feedback/Suggestions?
I am told by others who have been here before that the maximum diameter wheel that works with standard geometry are 17".
I am running 17" BBS 050's with 235 section tyres and 5mm spacers and hubcentric rings all round and no problems.
I am running 17" BBS 050's with 235 section tyres and 5mm spacers and hubcentric rings all round and no problems.