So, who's gonna step up to the plate and put this together?
I'll check with Brian, see what he thinks about this as a worthy piece for the Tech Section.
I seem to answer these questions about 30 times per year as well :?
Keep 'em runnin' gents
wheel from other bmw, what fits what
Moderators: GRNSHRK, ron, bfons
-
- Platinum Member
- Posts: 3711
- Joined: Thu Apr 08, 2004 3:24 pm
- Location: Gilroy (SF Bay Area) CA
Checked the Tech Articles section, but not to be . . .
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Re: Checked the Tech Articles section, but not to be . . .
Let's do it!GRNSHRK wrote:So, who's gonna step up to the plate and put this together?
I'll check with Brian, see what he thinks about this as a worthy piece for the Tech Section.
I seem to answer these questions about 30 times per year as well :?
Keep 'em runnin' gents
This is a much needed tech article and doesn't have to address every wheel, offset, and size. If something can be written to address the basics such as:
What does offset mean and what offset does the 6 use?
Which BMW wheels can be put on a 6 without hubcentric rings?
What is a hubcentric ring?
Which wheels need rings?
Why would I need spacers?
What are hubcentric spacers?
etc, etc, etc...
Anybody interested? Maybe we can get a couple of volunteers to collaborate on such an article...???
Brian
-----------------------
1984 Graphite M635 - Project Graphite - Sold
1985 Polaris M635 - Polaris - Sold
1987 L6 Black/Lotus White - My Queen has a new home
1980 633csi - Gone but not forgotten
-----------------------
1984 Graphite M635 - Project Graphite - Sold
1985 Polaris M635 - Polaris - Sold
1987 L6 Black/Lotus White - My Queen has a new home
1980 633csi - Gone but not forgotten
Here's a start
All,
Brucey has submitted this to me. I think it's a good start. I will use this doc as a basis and come up with something specific to the most often asked question, "Will these wheels fit?"
Brucey has submitted this to me. I think it's a good start. I will use this doc as a basis and come up with something specific to the most often asked question, "Will these wheels fit?"
- Attachments
-
[The extension doc has been deactivated and can no longer be displayed.]
Re: Here's a start
yeees! thanks a lot, guys, for such a perfect explaination.bcadmin wrote:Brucey has submitted this to me. I think it's a good start. I will use this doc as a basis and come up with something specific to the most often asked question, "Will these wheels fit?"