I don't remember the sequence of events when I pulled my dash. As usual, when I pulled the dash I figured it would be a week or so until I put it back. It's been six months. I know I pulled all the fascia below the dash (glovebox, consoles, etc) Then I think I pulled the dash then the a/c evap box, then the heater box.
So, I have re-installed the heater and a/c boxes but I can't get the dash even close. What am I doing wrong? This is my first dashboard-ectomy so if I'm doing something stupid please feel free to correct me.
Thanks!
HELP! e 24 Dash re-install
Moderators: GRNSHRK, ron, bfons
Re: HELP! e 24 Dash re-install
1986 635csi LOCUTUS / Arktis Blau Metallic / Pearl Beige / S38B36/ Close ratio dogleg 5sp
2002 E46 M3 / Topaz Blau Metallic / Black Nappa / 6 speed SMG software tuned / Bilstein PSS10 Coilovers / CMP RACP reinforcement
2002 E46 M3 / Topaz Blau Metallic / Black Nappa / 6 speed SMG software tuned / Bilstein PSS10 Coilovers / CMP RACP reinforcement
Re: HELP! e 24 Dash re-install
^^^^^
Yes, that was super helpful as I pulled the dash, but not so much on re-install.
Thanks anyhow!
Yes, that was super helpful as I pulled the dash, but not so much on re-install.
Thanks anyhow!
-
- Platinum Member
- Posts: 1659
- Joined: Mon Jul 16, 2007 2:58 pm
- Location: Cheltenham, U.K.
Re: HELP! e 24 Dash re-install
Make sure the locating tags are lined up with the corresponding points under the windscreen; make sure the bolt holes are lined up either side and push!
I'm assuming you've already removed the screen pillar trim.
Good luck
Rob
I'm assuming you've already removed the screen pillar trim.
Good luck
Rob
"Most of it necessary; all of it enjoyable." LJKS
'84 635CSi, dogleg...itbs and supercharger????? Eaton Mess
'84 635CSi, dogleg...itbs and supercharger????? Eaton Mess