OBC dsiplay gone dark
Moderators: GRNSHRK, ron, bfons
OBC dsiplay gone dark
Hi all,
I wondered if someone has gone through the experience of an OBC display gone dark suddenly? I think the info are still displayed, just not backlight.
Also, whilst pressing the buttons to see if it made a difference, the timer button's red light came on and is not going off. Is that related?
I'm hoping that there is a simple fix like a blown fuse somewhere...
P
I wondered if someone has gone through the experience of an OBC display gone dark suddenly? I think the info are still displayed, just not backlight.
Also, whilst pressing the buttons to see if it made a difference, the timer button's red light came on and is not going off. Is that related?
I'm hoping that there is a simple fix like a blown fuse somewhere...
P
635 Csi highline 3/89
Re: OBC dsiplay gone dark
Hi Monoi
Shine a torch on the display and see if you can still see the numbers if so most likely the light bar for the display has blown
I take it you have a RHD car if you are from London. If so, remove the stereo and you should be able to access the OBC slide the light bar out of the top of the unit using needle nose pliers
Once you have it out connect it to a 9 volt battery and test to see if it lights up if not
Garagistic do a LED conversion using your existing white bulb holder https://store.garagistic.com/13-button- ... conversion
The red timer light only means that the stopwatch on the OBC is running. Push the set-res button and it should stop
Manual for late OBC functions here https://drive.google.com/file/d/1OZybna ... sp=sharing
Shine a torch on the display and see if you can still see the numbers if so most likely the light bar for the display has blown
I take it you have a RHD car if you are from London. If so, remove the stereo and you should be able to access the OBC slide the light bar out of the top of the unit using needle nose pliers
Once you have it out connect it to a 9 volt battery and test to see if it lights up if not
Garagistic do a LED conversion using your existing white bulb holder https://store.garagistic.com/13-button- ... conversion
The red timer light only means that the stopwatch on the OBC is running. Push the set-res button and it should stop
Manual for late OBC functions here https://drive.google.com/file/d/1OZybna ... sp=sharing
'86 Euro 635 #1887204 Schwartz (086) Buffalo Schwartz Interior
Re: OBC dsiplay gone dark
Hi Daz,
Thank you very much for that. The numbers are still visible and seem to function as expected so I will do what you suggest.
Is the light bar consisting of normal bulbs?
P
Thank you very much for that. The numbers are still visible and seem to function as expected so I will do what you suggest.
Is the light bar consisting of normal bulbs?
P
635 Csi highline 3/89
Re: OBC dsiplay gone dark
I ordered the garagistic thing.
Is that common for both bulbs to blow out at the same time? Or is it that if one blows, the other won't work?
P
Is that common for both bulbs to blow out at the same time? Or is it that if one blows, the other won't work?
P
635 Csi highline 3/89
Re: OBC dsiplay gone dark
You are correct. If one bulb blows the other will not work
The bulbs are actually soldered on to the board
Hope the new light bar fixes the problem
The bulbs are actually soldered on to the board
Hope the new light bar fixes the problem
'86 Euro 635 #1887204 Schwartz (086) Buffalo Schwartz Interior
Re: OBC dsiplay gone dark
Thank you for your help and the link to the manual, the red light is now gone.☺
635 Csi highline 3/89
-
- Bigcoupe Contributor
- Posts: 323
- Joined: Wed Sep 10, 2014 12:08 am
- Location: Arden, NC 28704
635 manual
Monoi,
Here's a link for the complete 88/89 635 manual, note it's for US cars, however, many functions are the same for Euro cars. The manual is invaluable at times. Roger
https://drive.google.com/file/d/0B4jl9x ... sp=sharing
Here's a link for the complete 88/89 635 manual, note it's for US cars, however, many functions are the same for Euro cars. The manual is invaluable at times. Roger
https://drive.google.com/file/d/0B4jl9x ... sp=sharing
89 635CSiA (11/88 build)
AlpineWeiss II (218)/Natur(0200)
87 L6 635CSI Sold
87 MB 560SL Sold
AlpineWeiss II (218)/Natur(0200)
87 L6 635CSI Sold
87 MB 560SL Sold
Re: OBC dsiplay gone dark
Light bar arrived, radio removed, pliers to pull the light bar out, swapped new for old, inserted back and lo and behold, it works!
Thank you again.
Thank you again.
635 Csi highline 3/89
-
- Posts: 68
- Joined: Wed Feb 13, 2019 4:22 am
- Location: Melbourne, Australia
Re: OBC dsiplay gone dark
Thought I'd follow the very simple instructions especially seeing I also have a RHD car.
Radio out, easy enough as it doesn't work and needs replacing. Got my needle nose pliers and found there's a screw fitting obstructing the easy as pie removal process. Any suggestions???
Radio out, easy enough as it doesn't work and needs replacing. Got my needle nose pliers and found there's a screw fitting obstructing the easy as pie removal process. Any suggestions???
Past toys:
1979 Volvo282GT
1988 Porsche 944S
Current toy:
1986 635 CSi
1979 Volvo282GT
1988 Porsche 944S
Current toy:
1986 635 CSi
Re: OBC dsiplay gone dark
The light bar went past that, but on mine the screw is missing so there might have been enough movement. Tried to fit a new screw afterwards but its nigh on impossible and I have a loose screw somewhere below it now...
Maybe gentle persuasion might help in your case.
Maybe gentle persuasion might help in your case.
635 Csi highline 3/89
-
- Posts: 68
- Joined: Wed Feb 13, 2019 4:22 am
- Location: Melbourne, Australia
Re: OBC dsiplay gone dark
Monoi, I cannot see what the screw is for but the tab at the top of the white end hits the black section so I'm not sure if removing the screw itself will achieve much. I might have to invest in a small pair of multi grips as the needle nose pliers don't give much grip other than to apply gentle force.
Does the little tab at the top do anything. If not, I may have better luck trying to cut it off with a dremel or sharp chisel/knife.
Does the little tab at the top do anything. If not, I may have better luck trying to cut it off with a dremel or sharp chisel/knife.
Past toys:
1979 Volvo282GT
1988 Porsche 944S
Current toy:
1986 635 CSi
1979 Volvo282GT
1988 Porsche 944S
Current toy:
1986 635 CSi
-
- Posts: 68
- Joined: Wed Feb 13, 2019 4:22 am
- Location: Melbourne, Australia
Re: OBC dsiplay gone dark
So, turned out there wasn't just the screw section in the way, but a strengthening rib also that stopped the front of the white edge from moving. At this stage I got the dremel out and within no time at all, I had the elusive holder out.
Unfortunately, my less than perfect soldering skills ruined the light base board whilst trying to remove the old globes so a new garagistic piece has been ordered.
Now I wait.
Unfortunately, my less than perfect soldering skills ruined the light base board whilst trying to remove the old globes so a new garagistic piece has been ordered.
Now I wait.
Past toys:
1979 Volvo282GT
1988 Porsche 944S
Current toy:
1986 635 CSi
1979 Volvo282GT
1988 Porsche 944S
Current toy:
1986 635 CSi