Page 2 of 2
Re: Autopal Headlight Brand H1/H4 Sealed Beam Conversion
Posted: Tue May 31, 2016 1:30 am
by 86_6series
I think the left high beam should follow the same pattern as the right.
2 o'clock position to the right of the low beam.
Re: Autopal Headlight Brand H1/H4 Sealed Beam Conversion
Posted: Tue May 31, 2016 6:33 am
by dwcains
You need a lot more distance to get any sort of accurate aiming done - I usually get back maybe 20-25 feet from a vertical wall, on the back side of the local grocery store late at night. Then fine tune after driving around a bit.