Using dual filament bulbs in the tail lights
Moderators: GRNSHRK, ron, bfons
-
- Posts: 20
- Joined: Mon Oct 31, 2016 12:13 am
- Location: Georgia, USA
Using dual filament bulbs in the tail lights
Has anyone ever thought about using dual filament bulbs in the tail light? If one wanted to wire in 1157 bulbs would they just have to change the socket or would it be more complicated?
-
- Platinum Member
- Posts: 3711
- Joined: Thu Apr 08, 2004 3:24 pm
- Location: Gilroy (SF Bay Area) CA
Re: Using dual filament bulbs in the tail lights
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
- MisterFixit
- Posts: 205
- Joined: Thu Jan 22, 2009 9:07 pm
- Location: USA, Colorado, Golden
Re: Using dual filament bulbs in the tail lights
Hello Hakeem,GRNSHRK wrote: ↑Mon Feb 12, 2018 9:12 pm Hakeem, talk to this guy, Andy, just posted in the "for sale" section
viewtopic.php?f=8&t=29518
Been a while since you contacted me on this subject - almost a year? Did you ever figure something out that does this for you? If so, will you share it with the forum? You know that I have a solution using BMW Parts and methods of assembly, but maybe you came up with something as good or better, and could share it.
If not, my offer stands - I can build you a set with the upgrades: two tails and two brakes per side. Using a dual filament bulb in the BMW socket! I'll even send it out, and let you swap it into your car so you don't have to idle it for days... later you could return your old lights for a core refund.
Here is a picture of the light with all lamps installed - you'll have to take my word about the way they operate, but I can easily prove how they work, and how much improvement you get when they do.
Hope you are still enjoying your shark!
Andy
"Be Seen, and Not Hurt!"
Lighting Upgrades for 2002, E3, E12, E21, E23, E24, E28, E30, E32, E36, E39 - front & back
Headlight and Tail Light upgrades for maximum visibility. Headlight protection to keep lights intact.
Lighting Upgrades for 2002, E3, E12, E21, E23, E24, E28, E30, E32, E36, E39 - front & back
Headlight and Tail Light upgrades for maximum visibility. Headlight protection to keep lights intact.
Re: Using dual filament bulbs in the tail lights
I have these in my 1980 635Csi euro. They are fantastic! It's a great feeling to be visible from the rear in traffic. Easy matter of removing the old units and installing the upgraded units. Thanks again Andy!!
Bill 1980 635Csi euro
http://www.bigcoupe.com/gallery.php?id=205&parent_id=20
http://www.bigcoupe.com/gallery.php?id=205&parent_id=20
-
- Posts: 20
- Joined: Mon Oct 31, 2016 12:13 am
- Location: Georgia, USA
Re: Using dual filament bulbs in the tail lights
Hey Andy,MisterFixit wrote: ↑Fri Jan 04, 2019 6:15 pmHello Hakeem,GRNSHRK wrote: ↑Mon Feb 12, 2018 9:12 pm Hakeem, talk to this guy, Andy, just posted in the "for sale" section
viewtopic.php?f=8&t=29518
Been a while since you contacted me on this subject - almost a year? Did you ever figure something out that does this for you? If so, will you share it with the forum? You know that I have a solution using BMW Parts and methods of assembly, but maybe you came up with something as good or better, and could share it.
If not, my offer stands - I can build you a set with the upgrades: two tails and two brakes per side. Using a dual filament bulb in the BMW socket! I'll even send it out, and let you swap it into your car so you don't have to idle it for days... later you could return your old lights for a core refund.
Here is a picture of the light with all lamps installed - you'll have to take my word about the way they operate, but I can easily prove how they work, and how much improvement you get when they do.
P2141656.JPG
Hope you are still enjoying your shark!
Andy
It's been a while for sure. Unfortunately I retired my e24 and now drive an e39 that's been taking up most of my time, so I haven't been visiting the forum often.
Ironically I'm doing lighting upgrades on the e39 too haha.