Gents, picked up this cool set of Cloisonné Roundels from orval2, we basically traded these for those funky 80's sunglasses that he just had to have, to complete his 80's outfit
viewtopic.php?f=8&t=29763
These are aftermarket, but to my surprise they are actually overlaid onto the existing Roundels with a metallic layer that's perhaps 1 mm thick
What I am thinking about trying is to remove the existing clear coated standard Roundel emblem and fit these in, somehow, and clear coat them
I know, sounds like a stretch, but hey, nothing ventured, nothing gained
So, thoughts on this process
Oh, if this is even possible, I will need a trunk Roundel, preferably not in great shape
I have a couple of spare fronts that have chipped clear coat, so I'm good to go there
TIA
Refinishing the Roundels
Moderators: GRNSHRK, ron, bfons
-
- Platinum Member
- Posts: 3728
- Joined: Thu Apr 08, 2004 3:24 pm
- Location: Gilroy (SF Bay Area) CA
Refinishing the Roundels
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Re: Refinishing the Roundels
I think removing the old ones intact will be your biggest challenge. Is the glue letting go already? Once they are off, you can use some good panel bonding adhesive and I think they would stay put. Although panel bonding adhesive is pretty expensive.
Jose
Jose
1987 M6 - My dream car
- Ralph in Socal
- Platinum Member
- Posts: 2748
- Joined: Tue Apr 14, 2009 3:32 am
- Location: High Desert of SoCal
Re: Refinishing the Roundels
Let me see what I can find Bobbo. I have lots of roundels but the e24 rear has an extreme curve.
Use dental floss to get under the roundel to remove it. You probably already know though.
Ralph
Use dental floss to get under the roundel to remove it. You probably already know though.
Ralph
There is a very fine line between "Hobby" and Mental Illness.
85 635csi Zinno Auto
84 528i Euro
83 635 Euro Arktik
81 528i Kastanien 5-speed
88 528e Bronzit (Granpa Car)
86 535i Auto (For Sale)
81 633 csi (retired)
85 635csi Zinno Auto
84 528i Euro
83 635 Euro Arktik
81 528i Kastanien 5-speed
88 528e Bronzit (Granpa Car)
86 535i Auto (For Sale)
81 633 csi (retired)
-
- Platinum Member
- Posts: 3728
- Joined: Thu Apr 08, 2004 3:24 pm
- Location: Gilroy (SF Bay Area) CA
Re: Refinishing the Roundels
Hey Ralph, yes, that would be great
I know the rear Roundels are not common due to the curvature
I actually do have a spare, but it's glued to my valve cover
And I know how to get them off the car without damaging the paint, what I am trying to find out is how to get the Roundel itself separated from the base, so that I can glue in the Cloisonné versions
Since I don't need a pristine one, I'm sure whatever you find may be better than I need
Thanks again Ralph
I know the rear Roundels are not common due to the curvature
I actually do have a spare, but it's glued to my valve cover
And I know how to get them off the car without damaging the paint, what I am trying to find out is how to get the Roundel itself separated from the base, so that I can glue in the Cloisonné versions
Since I don't need a pristine one, I'm sure whatever you find may be better than I need
Thanks again Ralph
- Attachments
-
- Engine with AFM cover detail 1-sm.jpg (100.93 KiB) Viewed 3122 times
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black