Help Support Bigcoupe.com

Hood Release

Post in this forum for topics relating to the exterior. This includes body, windows, and accessories

Moderators: ron, bfons, GRNSHRK

Post Reply
[email protected]
Posts: 9
Joined: Tue May 09, 2017 9:49 pm
Location: North Carolina

Hood Release

Post by [email protected] » Fri Jun 01, 2018 12:25 pm

When I pull the hood release lever on my 1988 635 the hood does not pop-up. I have to insert a plastic tool between the hood and the cowling to lift the hood enough to get my fingers in the slot. Has anyone dealt with this?
Thanks, Douglas

User avatar
Da_Hose
Senior Member
Posts: 3067
Joined: Fri Mar 07, 2008 8:15 am
Location: Napa, Ca.

Re: Hood Release

Post by Da_Hose » Fri Jun 01, 2018 2:15 pm

I have the same issue, and have replaced both hood struts. The next thing I can think of is taking out the latching mechanism and cleaning/lubing thoroughly.

Jose
1987 M6 - My dream car

GRNSHRK
E12 Based Guru
Posts: 2584
Joined: Thu Apr 08, 2004 3:24 pm
Location: Sunnyvale (SF Bay Area) CA

Re: Hood Release

Post by GRNSHRK » Fri Jun 01, 2018 3:24 pm

+2, cleaning and lubricating the latch mechanisms helped greatly on mine, which also required prying my fingers under the hood to get it to pop up enough to raise it [-X

I recently replaced the hood shocks as well, which while keeping the hood up in place once it's raised, they didn't appear to help the unlatching issue #-o

HTH 8)
:mrgreen:
Bobbo
1980 633 CSi
Cypress Green/Pearl Beige
2011 F10 528i
2005 E46 330 Ci ZHP Cabrio
Image

You can never have too many BMW's

[email protected]
Posts: 9
Joined: Tue May 09, 2017 9:49 pm
Location: North Carolina

Re: Hood Release

Post by [email protected] » Sat Jun 02, 2018 1:40 am

Thanks for the suggestions.

Pod
Bigcoupe supporter
Posts: 3860
Joined: Tue Mar 16, 2010 8:32 pm
Location: usually in the barn, Kent, England.

Re: Hood Release

Post by Pod » Tue Jun 12, 2018 6:48 am

I find that the hood will generally raise if I push on and release one or both rear corners a few times. It sort of “rattles” it undone.

User avatar
wattsmonkey
Bigcoupe supporter
Posts: 1404
Joined: Mon Jul 16, 2007 2:58 pm
Location: Cheltenham, U.K.

Re: Hood Release

Post by wattsmonkey » Thu Jun 21, 2018 2:22 pm

Same with the M: the right-hand latch does not fully release, despite cleaning and lubrication and adjustments, but a bit of jiggling does the trick! This is not a euphemism.
"Most of it necessary; all of it enjoyable[!]" LJKS
'86 M635CSi #367 Bring the Noise.
'84 635CSi, dogleg fun

User avatar
sharkfan
Senior Member
Posts: 2067
Joined: Tue Sep 28, 2004 3:14 pm
Location: Guildford, U.K.

Re: Hood Release

Post by sharkfan » Thu Jun 21, 2018 5:41 pm

Yearly maintenance. Lube door hinges, bonnet hinges, door locks and catches, bonnet locks, boot lock, throttle cable and throttle body springs and stuff, and then lube the bearings on the ventilation fan.
2001 Alpina B10 V8 Touring (1 of 12 rhd)
1997 Alpina B12 5.7 L (1 of 2 rhd)
1995 Alpina B10 4.6 Touring (1 of 1 rhd)
1985 BMW M635CSi (1 of 524 rhd)
1982 BMW 635CSiA (1 of 100's left from the 1000's made and still valiantly fighting against a rusty grave)

Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests