Front bumper ends

Post in this forum for topics relating to the exterior. This includes body, windows, and accessories

Moderators: GRNSHRK, ron, bfons

Post Reply
dm635
Posts: 123
Joined: Thu Oct 07, 2004 2:14 pm
Location: louisville,ky

Front bumper ends

Post by dm635 »

I'm posting everywhere for these. These are exterior so a good spot to try. What I'm looking for is a good set of front bumper ends for an '87 and back. The ends have the orange/yellow reflector. Need to have all the mounting studs in place. That's the problem with mine. The studs are no more, missing in action. Thanks Dave
Past:
84-318i, 85-318i, 85-635 CSi, 86-635 CSi

Current:
87-635 CSi
User avatar
Jdesign
Posts: 26
Joined: Thu Jan 05, 2017 5:52 pm
Location: Madison, Wisconsin
Contact:

Re: Front bumper ends

Post by Jdesign »

It depends on which ends you need. If you are talking about #10 on the images below ECS and a few others have them available new.

https://drive.google.com/open?id=1EtRf4 ... Km4abzc-lc

https://www.ecstuning.com/b-genuine-bmw ... 111869769/

I suggest going on RealOEM.com and looking up the exact part number you need.
Image
BMW E24 633CSI - BMW M30B32
BMW E30 325IC - Toyota 1JZ-GTE
BMW E36 318i - Ford 5.0 FE302
https://www.instagram.com/_jdesigner_/
85mvdelphinus
Posts: 64
Joined: Sat May 03, 2014 5:31 am
Location: Danville, CA

Re: Front bumper ends

Post by 85mvdelphinus »

I purchased the right front covering (#51-11-1-869-770) from the dealer in October 2016. My net price was $231.70 (List $279.16). This part now appears to be discontinued.

However, the left front covering (#51-11-1-869-769) is still available from "RealOEM.com". Cost is $321.51 per the below link:

http://www.realoem.com/bmw/enUS/showpar ... 1111869770

Good luck,
Don
1985 635CSi 5MT Delphin Grey/Pearl Beige

Does a guilt free shark have a feeling of remoras?
dm635
Posts: 123
Joined: Thu Oct 07, 2004 2:14 pm
Location: louisville,ky

Re: Front bumper ends

Post by dm635 »

I ran into an old buddy at the last SESF who had a new one. Said it was the last one in stock. He paid and wanted $250. I just can't pay that much when there's got to be some good used ones out there. My 6 is no show car and $500 to dress up the front end on both ends is unlikely to happen. Used ones with all the mounting studs will have to do for now. Thanks for the info though.
Past:
84-318i, 85-318i, 85-635 CSi, 86-635 CSi

Current:
87-635 CSi
Post Reply