I just discovered that my front window guides are pretty rusted; must be due to the foam behind the mirrors holding up water.
I tried to remove them in order to replace or clean/repaint, but not sure about correct procedure.
There are two bolts on top, self understanding.
Third one is the adjustment bolt lower down; I removed the nuts from that one and tried to pull the guide with that stud out of the door, but seems there is not enough space (I have window in all-down position and all window whiskers/trims removed.
Does someone know the correct procedure to pull this guides out?
Front window guide
Moderators: GRNSHRK, ron, bfons