Help Support Bigcoupe.com

Just received my M6 Front Valance from DTMFirberwerkz

Post in this forum for topics relating to the exterior. This includes body, windows, and accessories

Moderators: ron, bfons, GRNSHRK

Post Reply
SEAN2005
Posts: 9
Joined: Tue Mar 31, 2020 1:23 am
Location: ALABAMA
Contact:

Just received my M6 Front Valance from DTMFirberwerkz

Post by SEAN2005 » Sat Jan 23, 2021 4:33 am

Hey Everyone,

I plan on getting the front valance installed soon at a professional shop. Is there any extra hardware that I need to purchase or will most professional shops have everything needed for this installation? Thanks!
My Current Fleet:

1983 633CSI
2003 330XI
2016 528i
2021 X5

Check out My YouTube Channel

https://www.youtube.com/channel/UCHtB_4 ... w2-B7BmP3g

User avatar
Da_Hose
Platinum Member
Platinum Member
Posts: 3228
Joined: Fri Mar 07, 2008 8:15 am
Location: Napa, Ca.

Re: Just received my M6 Front Valance from DTMFirberwerkz

Post by Da_Hose » Sat Jan 23, 2021 9:37 pm

I am SUPER interested to see how it looks when finished. My M6 air dam is all beat up, and finding a replacement that looks worse than mine is upwards of $1000. If you end up with a good result, that might be the way to go for me, and then I can take my time restoring my original piece.

There are three large brackets for mounting the stock air dam.

https://www.realoem.com/bmw/enUS/showpa ... Id=51_0510

However, I would expect any reputable shop can fabricate mounts as needed.

Jose
1987 M6 - My dream car

User avatar
635sharknose
Bigcoupe 100 Post club
Posts: 263
Joined: Fri Sep 13, 2019 4:58 pm
Location: The Netherlands
Contact:

Re: Just received my M6 Front Valance from DTMFirberwerkz

Post by 635sharknose » Sun Jan 24, 2021 7:24 pm

That looks quite good! Didn't know they were making these.
Can't this company advise in how to install it?
Paul
Image
Instagram: @635sharknose
1987 635CSi Bronzitbeige

SEAN2005
Posts: 9
Joined: Tue Mar 31, 2020 1:23 am
Location: ALABAMA
Contact:

Re: Just received my M6 Front Valance from DTMFirberwerkz

Post by SEAN2005 » Tue Jan 26, 2021 4:00 am

Da_Hose wrote:
Sat Jan 23, 2021 9:37 pm
I am SUPER interested to see how it looks when finished. My M6 air dam is all beat up, and finding a replacement that looks worse than mine is upwards of $1000. If you end up with a good result, that might be the way to go for me, and then I can take my time restoring my original piece.

There are three large brackets for mounting the stock air dam.

https://www.realoem.com/bmw/enUS/showpa ... Id=51_0510

However, I would expect any reputable shop can fabricate mounts as needed.

Jose
Thanks for the link. I will definitely keep you posted. I'll be documenting my journey on this site and my youtube page. The link is below. From what I've heard, these DTM lower valances are legit. Some folks from Bimmerforums had posted their information. They are on Facebook too. I paid about $560 for mine. Shipping from California to Alabama by Freight was about $165.
My Current Fleet:

1983 633CSI
2003 330XI
2016 528i
2021 X5

Check out My YouTube Channel

https://www.youtube.com/channel/UCHtB_4 ... w2-B7BmP3g

Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests