WTB - Ignition Switch Assembly...

Post in this forum for cars and/or parts wanted.

Moderators: GRNSHRK, ron, bfons

Post Reply
dlvad
Platinum Member
Platinum Member
Posts: 496
Joined: Sat Apr 03, 2004 2:57 pm
Location: Healdsburg, NorCal & Baja Sur, MX

WTB - Ignition Switch Assembly...

Post by dlvad »

Any chance someone may have a Ignition Switch Lock Assembly (Post 82) Need functioning Switch & One Key if possible...

Thanks! 😃
DV
Motorsport & Vintage Coupes
ALPINA Oldtimers of Course...
BMW-Classic CCA
User avatar
jps635
Platinum Member
Platinum Member
Posts: 872
Joined: Sat Feb 27, 2010 10:50 pm
Location: NZ

Re: WTB - Ignition Switch Assembly...

Post by jps635 »

These do wear and given they are a bit of a pain to remove, especially if you haven't removed the shear bolts, in my opinion is something better off replaced with new. Once you have the whole steering lock out is very simple to swap over the lock cylinder.
'85 635csi JPS (RA2-66)
dlvad
Platinum Member
Platinum Member
Posts: 496
Joined: Sat Apr 03, 2004 2:57 pm
Location: Healdsburg, NorCal & Baja Sur, MX

Re: WTB - Ignition Switch Assembly...

Post by dlvad »

Needed for test purposes only..
DV
Motorsport & Vintage Coupes
ALPINA Oldtimers of Course...
BMW-Classic CCA
dlvad
Platinum Member
Platinum Member
Posts: 496
Joined: Sat Apr 03, 2004 2:57 pm
Location: Healdsburg, NorCal & Baja Sur, MX

Re: WTB - Ignition Switch Assembly...

Post by dlvad »

Located one locally.

Thanks 🙂
DV
Motorsport & Vintage Coupes
ALPINA Oldtimers of Course...
BMW-Classic CCA
Post Reply