WTB Getrag 260 transmission
Moderators: GRNSHRK, ron, bfons
WTB Getrag 260 transmission
I'm replacing my transmission due to a currently undiagnosed problem. I don't have time right now to crack the case open and I hate putting miles on the ///M when the daily is down.
It's for an 84 633CSi original transmission was a 260/5, however a 260/6 should also work. I have the sheet metal shifter which I assume will work with all 260/6 trans. Correct me if I'm wrong
Have $$$, need transmission in Phoenix, AZ.
It's for an 84 633CSi original transmission was a 260/5, however a 260/6 should also work. I have the sheet metal shifter which I assume will work with all 260/6 trans. Correct me if I'm wrong
Have $$$, need transmission in Phoenix, AZ.
1984 BMW 633CSi
Re: WTB Getrag 260 transmission
With a 260/6 you will need the aluminum shifter assembly.
http://www.Drive4Corners.com
'79 635CSi Revival
'80 635CSi
'83 633CSi Callaway Turbo continued as 1988 535is Turbo
SOLD: '81 635CSi/A
'79 635CSi Revival
'80 635CSi
'83 633CSi Callaway Turbo continued as 1988 535is Turbo
SOLD: '81 635CSi/A
Re: WTB Getrag 260 transmission
Hi There, I have a full 265 setup that I am selling. Look under the parts for sale and PM me if interested. Thank-you!
------------------------------------
1988 M6 / 1988 635csi 5sp / 1986 635csi 5sp / 1986 635csi Auto
1989 325i 5sp / 1987 325is 5sp
1973 3.0CS / 1970 2800CS
2000 323i Touring
Gone but not forgotten:
1970 2002 / 1996 M3 S50B32 / 2009 M3 / 1979 528i
1988 M6 / 1988 635csi 5sp / 1986 635csi 5sp / 1986 635csi Auto
1989 325i 5sp / 1987 325is 5sp
1973 3.0CS / 1970 2800CS
2000 323i Touring
Gone but not forgotten:
1970 2002 / 1996 M3 S50B32 / 2009 M3 / 1979 528i
- zinnocoupe
- Posts: 506
- Joined: Fri Sep 19, 2014 12:57 am
- Location: Vancouver BC
Re: WTB Getrag 260 transmission
I have a 260/5 with the sheet metal shifter assembly. I just took it off and bolted it onto the 260/6 I am going to swap into my e24. It seems to fit and shift through the gears, is there a reason only the aluminum assembly is needed for the 260/6? Both trans have the exact same mounting points etc for the sheetmetal plate. I've heard some 260/6s don't have the holes tapped for the mounting bolts but mine does. Thxtschultz wrote:With a 260/6 you will need the aluminum shifter assembly.
Re: WTB Getrag 260 transmission
I've never tried it so I can't say. This is what I have heard from mye28.com
http://www.Drive4Corners.com
'79 635CSi Revival
'80 635CSi
'83 633CSi Callaway Turbo continued as 1988 535is Turbo
SOLD: '81 635CSi/A
'79 635CSi Revival
'80 635CSi
'83 633CSi Callaway Turbo continued as 1988 535is Turbo
SOLD: '81 635CSi/A
- zinnocoupe
- Posts: 506
- Joined: Fri Sep 19, 2014 12:57 am
- Location: Vancouver BC
Re: WTB Getrag 260 transmission
Yes, I have heard this too but it seems to fit fine and work as far as you can tell with it out of the car. Mmmm, more research needed. Thx
Re: WTB Getrag 260 transmission
WISE9UY wrote:Hi There, I have a full 265 setup that I am selling. Look under the parts for sale and PM me if interested. Thank-you!
I did see that thanks, although I think a 265 is out of my price range for now.
1984 BMW 633CSi
Re: WTB Getrag 260 transmission
I have several good 260 5 speeds, one was rebuilt 40K miles ago , need the space , will pack and ship Call me at 603-228-2888 , payment by credit card accepted!
Mario L.
Bow, NH 03304
Mario L.
Bow, NH 03304
Mario Langsten
-
- Posts: 30
- Joined: Wed Oct 12, 2016 12:56 am
- Location: Utah
Re: WTB Getrag 260 transmission
What's your location? I'll be pulling my G260 from my 84 633 shortly.
Re: WTB Getrag 260 transmission
Magnum where were you two weeks ago!??
I ended up buying a transmission from a wrecking yard in Oregon. Probably far from the best deal but it got delivered on Monday so at least I have one now.
I ended up buying a transmission from a wrecking yard in Oregon. Probably far from the best deal but it got delivered on Monday so at least I have one now.
1984 BMW 633CSi
-
- Posts: 24
- Joined: Sat Feb 06, 2016 8:16 pm
- Location: Perris,CA
Re: WTB Getrag 260 transmission
I have one of those in my 630 ... first 5 speed swap, now I'll do it right with a 265, which I have!
1987 535i
1977 630 CSi
1974 3.0 CSi
1977 630 CSi
1974 3.0 CSi