WTB: Interior Bits, Engine Bay Bits, Hardware, Door Handle Locks
Posted: Thu Oct 27, 2016 1:27 pm
Hi guys,
I am in need of a few items for my 1989 635csi. I'm located in Durand, Michigan 48429.
Starting a restoration next year, and I want to have all the hardware ready, bagged, and tagged!
Interior:
-Third brake light interior finishing cover
Engine Bay:
-Hood Black Plastic Fresh Air Vent Covers (underside)
-Alternator cooling tube/hose (if these cars had them)
Exterior:
-Door lock cylinders with key & heaters & trunk lock (matching key)
-Working Driver Side Corner Light Housing (mine signals fine, but running light is in-op...bulb is new)
-Door Upper Weatherstripping, both sides (what the door glass seals off to, runs the perimeter of the window opening)
Hardware:
-B-Pillar Trim Retaining Hardware (one side)
-Knee bolster panel retaining hardware (under the steering column)
-Trunk Mount Antenna Mounting Hardware & Exterior Cap/Seal/Retaining Nut
-License plate light screws & retainers (all four)
-License plate screws (cannot seem to find the specific ones that fit my retainers)
I think that's it!
Thanks,
~Cody
EDIT: Bumped 10/26/17 with revised list!
I am in need of a few items for my 1989 635csi. I'm located in Durand, Michigan 48429.
Starting a restoration next year, and I want to have all the hardware ready, bagged, and tagged!
Interior:
-Third brake light interior finishing cover
Engine Bay:
-Hood Black Plastic Fresh Air Vent Covers (underside)
-Alternator cooling tube/hose (if these cars had them)
Exterior:
-Door lock cylinders with key & heaters & trunk lock (matching key)
-Working Driver Side Corner Light Housing (mine signals fine, but running light is in-op...bulb is new)
-Door Upper Weatherstripping, both sides (what the door glass seals off to, runs the perimeter of the window opening)
Hardware:
-B-Pillar Trim Retaining Hardware (one side)
-Knee bolster panel retaining hardware (under the steering column)
-Trunk Mount Antenna Mounting Hardware & Exterior Cap/Seal/Retaining Nut
-License plate light screws & retainers (all four)
-License plate screws (cannot seem to find the specific ones that fit my retainers)
I think that's it!
Thanks,
~Cody
EDIT: Bumped 10/26/17 with revised list!