Looking for a good used Flywheel / Ring Gear for M90 motor
Moderators: GRNSHRK, ron, bfons
-
- Posts: 75
- Joined: Sun Jun 26, 2016 7:10 pm
- Location: Columbus, OH
Looking for a good used Flywheel / Ring Gear for M90 motor
Hi,
I'm looking for a good used or a source for a new ring gear for my flywheel separate or complete. It's from an L Block M90 motor out of a '78 635Csi. Diameter measures 260mm and has 116 teeth.
Many thanks,
Mark
I'm looking for a good used or a source for a new ring gear for my flywheel separate or complete. It's from an L Block M90 motor out of a '78 635Csi. Diameter measures 260mm and has 116 teeth.
Many thanks,
Mark
- Attachments
-
- 1020171225.jpg (1.29 MiB) Viewed 74415 times
-
- 1020171225a.jpg (1.19 MiB) Viewed 74415 times
-
- 1020171226.jpg (1.04 MiB) Viewed 74415 times
-
- 1020171226a.jpg (964.13 KiB) Viewed 74415 times
Re: Looking for a good used Flywheel / Ring Gear for M90 motor
ill check this evening i think i have a couple.
.1977 H&B 630CSI - http://www.sidedraftsix.com.
Re: Looking for a good used Flywheel / Ring Gear for M90 motor
I will also check and am just over in Indiana.
------------------------------------
1988 M6 / 1988 635csi 5sp / 1986 635csi 5sp / 1986 635csi Auto
1989 325i 5sp / 1987 325is 5sp
1973 3.0CS / 1970 2800CS
2000 323i Touring
Gone but not forgotten:
1970 2002 / 1996 M3 S50B32 / 2009 M3 / 1979 528i
1988 M6 / 1988 635csi 5sp / 1986 635csi 5sp / 1986 635csi Auto
1989 325i 5sp / 1987 325is 5sp
1973 3.0CS / 1970 2800CS
2000 323i Touring
Gone but not forgotten:
1970 2002 / 1996 M3 S50B32 / 2009 M3 / 1979 528i
-
- Posts: 75
- Joined: Sun Jun 26, 2016 7:10 pm
- Location: Columbus, OH
Re: Looking for a good used Flywheel / Ring Gear for M90 motor
Thanks guys.
WISE9UY, you had sold me that gas tank a while back. Hope you can hook me up with a flywheel! Car is still undergoing restoration. Re-rung the pistons and honed the bores last night...
Mark
WISE9UY, you had sold me that gas tank a while back. Hope you can hook me up with a flywheel! Car is still undergoing restoration. Re-rung the pistons and honed the bores last night...
Mark
- Attachments
-
- 1023171926.jpg (816.04 KiB) Viewed 71318 times
-
- 1018171802.jpg (1.21 MiB) Viewed 71318 times
Re: Looking for a good used Flywheel / Ring Gear for M90 motor
Hi Mark,
I thought you Sechserreihe forum name looked familiar! I did have one loose but have since sold it. However, I have parted out a 1980 633csi so will check the flywheel on that. I would think they are the same but will take measures tonight.
Cheers!
I thought you Sechserreihe forum name looked familiar! I did have one loose but have since sold it. However, I have parted out a 1980 633csi so will check the flywheel on that. I would think they are the same but will take measures tonight.
Cheers!
------------------------------------
1988 M6 / 1988 635csi 5sp / 1986 635csi 5sp / 1986 635csi Auto
1989 325i 5sp / 1987 325is 5sp
1973 3.0CS / 1970 2800CS
2000 323i Touring
Gone but not forgotten:
1970 2002 / 1996 M3 S50B32 / 2009 M3 / 1979 528i
1988 M6 / 1988 635csi 5sp / 1986 635csi 5sp / 1986 635csi Auto
1989 325i 5sp / 1987 325is 5sp
1973 3.0CS / 1970 2800CS
2000 323i Touring
Gone but not forgotten:
1970 2002 / 1996 M3 S50B32 / 2009 M3 / 1979 528i
Re: Looking for a good used Flywheel / Ring Gear for M90 motor
Hi Mark.
Here is what I have... see attached images. You can count the teeth yourself... I cound 116 :) PM me.
Here is what I have... see attached images. You can count the teeth yourself... I cound 116 :) PM me.
- Attachments
-
- 20171026_013618.jpg (325.6 KiB) Viewed 69547 times
-
- 20171026_013601.jpg (308.52 KiB) Viewed 69547 times
-
- 20171026_013542.jpg (273.9 KiB) Viewed 69547 times
-
- 20171026_013509.jpg (294.77 KiB) Viewed 69547 times
------------------------------------
1988 M6 / 1988 635csi 5sp / 1986 635csi 5sp / 1986 635csi Auto
1989 325i 5sp / 1987 325is 5sp
1973 3.0CS / 1970 2800CS
2000 323i Touring
Gone but not forgotten:
1970 2002 / 1996 M3 S50B32 / 2009 M3 / 1979 528i
1988 M6 / 1988 635csi 5sp / 1986 635csi 5sp / 1986 635csi Auto
1989 325i 5sp / 1987 325is 5sp
1973 3.0CS / 1970 2800CS
2000 323i Touring
Gone but not forgotten:
1970 2002 / 1996 M3 S50B32 / 2009 M3 / 1979 528i
Re: Looking for a good used Flywheel / Ring Gear for M90 motor
Some images of the clutches and pressure plates...
- Attachments
-
- M30 Clutch Pressure - d.jpg (217.18 KiB) Viewed 67069 times
-
- M30 Clutch Pressure - c.jpg (204.35 KiB) Viewed 67069 times
-
- M30 Clutch Pressure - b.jpg (171.78 KiB) Viewed 67069 times
-
- M30 Clutch Pressure - a.jpg (148.22 KiB) Viewed 67069 times
------------------------------------
1988 M6 / 1988 635csi 5sp / 1986 635csi 5sp / 1986 635csi Auto
1989 325i 5sp / 1987 325is 5sp
1973 3.0CS / 1970 2800CS
2000 323i Touring
Gone but not forgotten:
1970 2002 / 1996 M3 S50B32 / 2009 M3 / 1979 528i
1988 M6 / 1988 635csi 5sp / 1986 635csi 5sp / 1986 635csi Auto
1989 325i 5sp / 1987 325is 5sp
1973 3.0CS / 1970 2800CS
2000 323i Touring
Gone but not forgotten:
1970 2002 / 1996 M3 S50B32 / 2009 M3 / 1979 528i
-
- Posts: 75
- Joined: Sun Jun 26, 2016 7:10 pm
- Location: Columbus, OH
Re: Looking for a good used Flywheel / Ring Gear for M90 motor
Big thanks goes out to Wise9uy for hooking me up with a proper flywheel, clutch and pressure plate.
Really appreciate it. Project is moving along...
Really appreciate it. Project is moving along...
- Attachments
-
- 1122171037a.jpg (1.23 MiB) Viewed 46469 times
Re: Looking for a good used Flywheel / Ring Gear for M90 motor
Happy to help!Sechserreihe wrote: ↑Thu Nov 30, 2017 2:37 pm Big thanks goes out to Wise9uy for hooking me up with a proper flywheel, clutch and pressure plate.
Really appreciate it. Project is moving along...
------------------------------------
1988 M6 / 1988 635csi 5sp / 1986 635csi 5sp / 1986 635csi Auto
1989 325i 5sp / 1987 325is 5sp
1973 3.0CS / 1970 2800CS
2000 323i Touring
Gone but not forgotten:
1970 2002 / 1996 M3 S50B32 / 2009 M3 / 1979 528i
1988 M6 / 1988 635csi 5sp / 1986 635csi 5sp / 1986 635csi Auto
1989 325i 5sp / 1987 325is 5sp
1973 3.0CS / 1970 2800CS
2000 323i Touring
Gone but not forgotten:
1970 2002 / 1996 M3 S50B32 / 2009 M3 / 1979 528i