WTB: Just one Style 8 rim for a spare (16 inch)

Post in this forum for cars and/or parts wanted.

Moderators: GRNSHRK, ron, bfons

Post Reply
Jambers
Posts: 62
Joined: Mon Aug 28, 2017 9:41 pm
Location: East Midlands UK

WTB: Just one Style 8 rim for a spare (16 inch)

Post by Jambers »

Hi, as per the title, just looking for one alloy wheel as a spare for my 635CSi. Centre cap not needed, and condition not too important (i.e. not damaged so badly that it is unusable/unsafe - just usable and one that holds air is fine).

These (as most of you will know) were from an 8 series. Though any 16 inch wheel probably do as long as the offset is 20 or lower.

UK only to keep postage etc down.

Like this one: http://www.bmwstylewheels.com/bmw/8
Current cars:
1989 635CSi Manual
2007 Z4M Coupe
G31 530d M Sport
F21 118i M Sport
Based in the U.K. Leicestershire
Previously : F30, E60, E21, E30, E12, E28
Jambers
Posts: 62
Joined: Mon Aug 28, 2017 9:41 pm
Location: East Midlands UK

Re: WTB: Just one Style 8 rim for a spare (16 inch)

Post by Jambers »

Hi guys I've had no joy, so any one have a 16 inch wheel with 5/120 and ET 20 or less?

To be honest even a steel wheel I think would do for the purposes of a spare, and then here's a question:

Has anyone used a space saver on their E24, and if so is there a specific rim/ET size, or would any 5/120 granny do the job? Failing this I'll just resort to Tyreweld in the boot!!
Current cars:
1989 635CSi Manual
2007 Z4M Coupe
G31 530d M Sport
F21 118i M Sport
Based in the U.K. Leicestershire
Previously : F30, E60, E21, E30, E12, E28
Post Reply