Any chance someone may have a Ignition Switch Lock Assembly (Post 82) Need functioning Switch & One Key if possible...
Thanks!
WTB - Ignition Switch Assembly...
Moderators: GRNSHRK, ron, bfons
-
- Platinum Member
- Posts: 498
- Joined: Sat Apr 03, 2004 2:57 pm
- Location: Healdsburg, NorCal & Baja Sur, MX
WTB - Ignition Switch Assembly...
DV
Motorsport & Vintage Coupes
ALPINA Oldtimers of Course...
BMW-Classic CCA
Motorsport & Vintage Coupes
ALPINA Oldtimers of Course...
BMW-Classic CCA
Re: WTB - Ignition Switch Assembly...
These do wear and given they are a bit of a pain to remove, especially if you haven't removed the shear bolts, in my opinion is something better off replaced with new. Once you have the whole steering lock out is very simple to swap over the lock cylinder.
'85 635csi JPS (RA2-66)
-
- Platinum Member
- Posts: 498
- Joined: Sat Apr 03, 2004 2:57 pm
- Location: Healdsburg, NorCal & Baja Sur, MX
Re: WTB - Ignition Switch Assembly...
Needed for test purposes only..
DV
Motorsport & Vintage Coupes
ALPINA Oldtimers of Course...
BMW-Classic CCA
Motorsport & Vintage Coupes
ALPINA Oldtimers of Course...
BMW-Classic CCA
-
- Platinum Member
- Posts: 498
- Joined: Sat Apr 03, 2004 2:57 pm
- Location: Healdsburg, NorCal & Baja Sur, MX
Re: WTB - Ignition Switch Assembly...
Located one locally.
Thanks
Thanks
DV
Motorsport & Vintage Coupes
ALPINA Oldtimers of Course...
BMW-Classic CCA
Motorsport & Vintage Coupes
ALPINA Oldtimers of Course...
BMW-Classic CCA