Help Me Finish my project. Parts List
Moderators: GRNSHRK, ron, bfons
-
- Posts: 212
- Joined: Wed Nov 20, 2013 4:17 pm
- Location: Massachusetts, U.S.
Help Me Finish my project. Parts List
So off the top of my head i'm looking for a few odd bits to get my project closer to its final state. Car is an 88 Auto, swapping to manual.
OEM Clutch Master in working condition.
Shifter linkages that will work for a g260/5 into a late e24
Possibly looking for a G260/6 with associated drive shaft if anyone somewhat local to Boston has one for a reasonable price.
Working Gauge Cluster, have had mine rebuilt a few times and still failed after a short period, plus got some water in it due to my leaky garage roof.
Clutch master to slave cylinder hydraulic lines
Thats all I can think of now. I also have parts I can trade. Including a world bumper set, late model gas tank, front and rear suspension. Front Calipers etc... let me know if you need any parts I may just have them. Thanks guys!
OEM Clutch Master in working condition.
Shifter linkages that will work for a g260/5 into a late e24
Possibly looking for a G260/6 with associated drive shaft if anyone somewhat local to Boston has one for a reasonable price.
Working Gauge Cluster, have had mine rebuilt a few times and still failed after a short period, plus got some water in it due to my leaky garage roof.
Clutch master to slave cylinder hydraulic lines
Thats all I can think of now. I also have parts I can trade. Including a world bumper set, late model gas tank, front and rear suspension. Front Calipers etc... let me know if you need any parts I may just have them. Thanks guys!
Re: Help Me Finish my project. Parts List
I have a spare G260/6 but I'm not exactly close to you.
http://www.Drive4Corners.com
'79 635CSi Revival
'80 635CSi
'83 633CSi Callaway Turbo continued as 1988 535is Turbo
SOLD: '81 635CSi/A
'79 635CSi Revival
'80 635CSi
'83 633CSi Callaway Turbo continued as 1988 535is Turbo
SOLD: '81 635CSi/A
-
- Posts: 212
- Joined: Wed Nov 20, 2013 4:17 pm
- Location: Massachusetts, U.S.
-
- Posts: 797
- Joined: Wed Sep 01, 2010 3:29 pm
- Location: Broomfield, CO
Re: Help Me Finish my project. Parts List
OEM Clutch Master in working condition ... Buy new they are not worth installing used.
- 12 535i
- 92 325ic
- 92 325ic
Re: Help Me Finish my project. Parts List
brickwhite wrote: ↑Wed Apr 24, 2019 11:21 am OEM Clutch Master in working condition ... Buy new they are not worth installing used.
What Brickwhite said, install new, as they are such a bitch to install, ooh and remove the drivers seat, first.
I fractured a rib laying on the front edge of the drivers seat.
Jay
'88 M6, Red/Tan
My NEW Website https://www.jaysbmwparts.com/
'88 M6, Red/Tan
My NEW Website https://www.jaysbmwparts.com/
-
- Posts: 212
- Joined: Wed Nov 20, 2013 4:17 pm
- Location: Massachusetts, U.S.
Re: Help Me Finish my project. Parts List
Haha fair enough. I was planning on getting a new one, but was hoping to save a few $ by buying used. It seems like it would be a hassle, and is the main reason why i'm waiting to put the engine back in. Luckily my drivers seat has been removed for awhile now, so I should have ample space to get the job done.JCS wrote: ↑Wed Apr 24, 2019 8:03 pmbrickwhite wrote: ↑Wed Apr 24, 2019 11:21 am OEM Clutch Master in working condition ... Buy new they are not worth installing used.
What Brickwhite said, install new, as they are such a bitch to install, ooh and remove the drivers seat, first.
I fractured a rib laying on the front edge of the drivers seat.
-
- Platinum Member
- Posts: 3312
- Joined: Thu Sep 28, 2006 9:28 pm
- Location: scottsdale, arizona
- Contact:
Re: Help Me Finish my project. Parts List
kylefav390 wrote: ↑Wed Apr 24, 2019 2:56 amBallpark on price? I'm not sure what shipping might be but if its not too bad I could go for it. If not i'll just hold out for something local.
I have shipped quite a few trannies cross country via UPS. I put them in a plastic container from home depot with some foam board insulation around them. Material cost about $15. Shipping weight is about 90#s and cost is between $90 and less than a $100
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
flickr.com/photos/bertsphotos.
Re: Help Me Finish my project. Parts List
What year is your car?
-
- Posts: 212
- Joined: Wed Nov 20, 2013 4:17 pm
- Location: Massachusetts, U.S.