Hi,
Looking for type 3 (1987 - 1989) bumper covers (bellows).
I need these:
Back/ right: 51121967542 > NOT NEEDED ANYMORE
Front/ right: 51111967624 > NOT NEEDED ANYMORE
Front/ left: 51111967623 > NOT NEEDED ANYMORE
Anyone?
Wanted: type 3 (1987 - 1989) bumper covers (bellows)
Moderators: GRNSHRK, ron, bfons
- 635sharknose
- Posts: 513
- Joined: Fri Sep 13, 2019 4:58 pm
- Location: The Netherlands
- Contact:
Wanted: type 3 (1987 - 1989) bumper covers (bellows)
Last edited by 635sharknose on Sat Apr 04, 2020 9:37 am, edited 2 times in total.
Paul
Instagram: @635sharknose
1987 635CSi Bronzitbeige
Instagram: @635sharknose
1987 635CSi Bronzitbeige
Re: Wanted: type 3 (1987 - 1989) bumper covers (bellows)
I have both fronts, and all the plastic sections are sound, although the left side in particular would need a bit more than a light rub down before paint. Also, the internal metal sections are heavily corroded to the point where it might take a bit or ingenuity and improvisation to make them do their intended job.
Also, interestingly, they have, respectively left and right, the numbers 51.11-1971 806.9 and 51.11-1971 805.9 moulded into the plastic. But neither of these numbers seem to be recognised by OEM. Is it possible that they are for a different model altogether? When I bought them I'm certain they were described as for an E24.
I've been close on a few occasions to throwing them out, so they would be foc to anyone than could make use of them.
I'll sort some pics and add to this post shortly.
Also, interestingly, they have, respectively left and right, the numbers 51.11-1971 806.9 and 51.11-1971 805.9 moulded into the plastic. But neither of these numbers seem to be recognised by OEM. Is it possible that they are for a different model altogether? When I bought them I'm certain they were described as for an E24.
I've been close on a few occasions to throwing them out, so they would be foc to anyone than could make use of them.
I'll sort some pics and add to this post shortly.
- Attachments
-
- 81768680_566322017286296_766931595419451392_n.jpg (303.62 KiB) Viewed 2688 times
-
- 85092956_771953639979964_8363065193835528192_n.jpg (197.95 KiB) Viewed 2688 times
-
- 85155100_982662302135939_3569137270587916288_n.jpg (132.23 KiB) Viewed 2688 times
-
- 85243862_1521577284663467_2405443442541854720_n.jpg (349.99 KiB) Viewed 2688 times
Phil
__________________________
1988 Highline 635 CSi
__________________________
1988 Highline 635 CSi
- 635sharknose
- Posts: 513
- Joined: Fri Sep 13, 2019 4:58 pm
- Location: The Netherlands
- Contact:
Re: Wanted: type 3 (1987 - 1989) bumper covers (bellows)
Phil,
Thank you very much for these parts!!
You are a very kind and helpful person.
MEANWHILE I FOUND THEM ALL, NO NEED FOR THESE PARTS ANYMORE
Thank you very much for these parts!!
You are a very kind and helpful person.
MEANWHILE I FOUND THEM ALL, NO NEED FOR THESE PARTS ANYMORE
Paul
Instagram: @635sharknose
1987 635CSi Bronzitbeige
Instagram: @635sharknose
1987 635CSi Bronzitbeige